{
  "$schema": "https://www.conphora.com/schemas/regulation-page.json",
  "code": "CIR",
  "locale": "en",
  "url": "https://www.conphora.com/regulations/cir/",
  "json": "https://www.conphora.com/regulations/cir.json",
  "summaryPdf": "https://www.conphora.com/regulations/cir/summary.pdf",
  "dateModified": "2026-09-11",
  "regulation": {
    "code": "CIR",
    "name": "Regulation (EU) 2016/424 of the European Parliament and of the Council of 9 March 2016 on cableway installations and repealing Directive 2000/9/EC",
    "shortName": "Cableway Installations Regulation",
    "reference": "Regulation (EU) 2016/424",
    "celex": "32016R0424",
    "eurlex": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424",
    "actType": "Regulation",
    "category": "CE / Product Safety",
    "inForce": "2016-04-20",
    "appliesFrom": "2018-04-21",
    "changing": false,
    "video": "regulation-cir"
  },
  "answer": "The Cableway Installations Regulation governs subsystems and safety components for cableway installations on the EU market and new passenger cableways, with a safety analysis, notified-body assessment, CE marking and duties for manufacturers, importers and the person responsible. It has applied since 21 April 2018; the emergency procedures of Regulation (EU) 2024/2748 apply from 29 May 2026.",
  "description": "CIR guide: the Cableway Installations Regulation (EU) 2016/424, which cableways, subsystems and safety components it covers, the safety analysis, the notified-body modules to CE marking, the 30-year records, key dates and how to comply.",
  "enforcedBy": "National market surveillance authorities enforce the regulation for subsystems and safety components under Article 39, which still cites Article 15(3) and Articles 16 to 29 of Regulation (EC) No 765/2008, read as Regulation (EU) 2019/1020 since 16 July 2021 (the regulation is listed in point 61 of Annex I to Regulation (EU) 2019/1020), while the authorisation, entry into service and operation of the installations themselves are national procedures under Articles 5, 9 and 10. In Denmark, Erhvervsstyrelsen, which absorbed Sikkerhedsstyrelsen in January 2026 and runs its Markedsovervågning department, is the control authority under the product act (lovbekendtgørelse nr. 22 of 8 January 2026, § 2, stk. 1, nr. 39, and § 9) and, since executive order nr. 490 of 28 May 2026 replaced 'Sikkerhedsstyrelsen' with 'Erhvervsstyrelsen' throughout executive order nr. 2517 of 14 December 2021 on cableway installations, it is also the authority named in that order: it approves new installations for entry into service and designates the notified bodies; Arbejdstilsynet remains the authority for installations made to order or imported for offshore oil and gas activities. The toolkit is corrective action within a period commensurate with the risk, prohibition or restriction of the making available, withdrawal or recall, orders to end formal non-compliance such as missing CE marking, notified-body number or declaration, restriction or prohibition of the operation of an installation that endangers persons or property, and national penalties that must be effective, proportionate and dissuasive and may include criminal penalties for serious infringements. Article 40(1) also declares Article 21 of Regulation (EC) No 765/2008 applicable to those measures; that article is one of the provisions repealed by Regulation (EU) 2019/1020 and is read as the corresponding provisions of that regulation, while Article 30 on the CE marking, referred to in Articles 20 and 43(1)(a), remains in force.",
  "keyDates": [
    {
      "date": "2016-03-09",
      "label": "Regulation (EU) 2016/424 adopted by the European Parliament and the Council, replacing Directive 2000/9/EC with a directly applicable regulation aligned with the New Legislative Framework",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · title and signature block after Art. 48"
    },
    {
      "date": "2016-03-31",
      "label": "Publication in the Official Journal, OJ L 81 of 31 March 2016, page 1",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · header of the consolidated text"
    },
    {
      "date": "2016-04-20",
      "label": "Entry into force, the twentieth day following publication",
      "source": "https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32016R0424 · Art. 48(1)"
    },
    {
      "date": "2016-10-21",
      "label": "Articles 22 to 38 (notification of conformity assessment bodies and notified bodies) and Article 44 (committee procedure) apply, so that bodies could be notified before the main application date",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 48(2)(a)"
    },
    {
      "date": "2018-03-21",
      "label": "Article 45(1) applies: Member States must have laid down their rules on penalties and notified them to the Commission by this date",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 45(1) and Art. 48(2)(b)"
    },
    {
      "date": "2018-04-21",
      "label": "The regulation applies in full and Directive 2000/9/EC is repealed; subsystems and safety components conforming to the directive and placed on the market before this date, and installations conforming to it and installed before this date, may still be made available or enter into service, and certificates and approval decisions issued for safety components under the directive remain valid",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 46, Art. 47 and Art. 48(2)"
    },
    {
      "date": "2022-01-01",
      "label": "Danish executive order nr. 2517 of 14 December 2021 on cableway installations in force, replacing executive order nr. 211 of 14 March 2018: the building owner (bygherren) is the person responsible for the installation and applies to Sikkerhedsstyrelsen for approval before entry into service; instructions and safety information must be in Danish",
      "source": "https://www.retsinformation.dk/eli/lta/2021/2517 · § 5, § 6, § 8 and § 14"
    },
    {
      "date": "2024-11-28",
      "label": "Regulation (EU) 2024/2748 in force: definitions of crisis-relevant goods and internal market emergency mode added to Article 3 and Chapter Va (Articles 43a to 43e) on emergency procedures inserted",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748 · Art. 2 and Art. 7"
    },
    {
      "date": "2026-05-29",
      "label": "The emergency procedures of Regulation (EU) 2024/2748 apply",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748 · Art. 7"
    },
    {
      "date": "2026-05-30",
      "label": "Danish executive order nr. 490 of 28 May 2026 in force: 'Sikkerhedsstyrelsen' is replaced by 'Erhvervsstyrelsen' throughout executive order nr. 2517 on cableway installations, the order is re-based on the product act (lovbekendtgørelse nr. 22 of 8 January 2026, § 37, stk. 3 and 4), the footnote is updated with Regulation (EU) 2024/2748, and a new § 8, stk. 2, requires a subsystem or safety component covered by an extended Article 43c(2) authorisation to carry the information that it is placed on the market as a crisis-relevant good, clearly and in Danish or English",
      "source": "https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 1 to 4, and § 2"
    }
  ],
  "amendedBy": [
    {
      "reference": "Regulation (EU) 2024/2748",
      "celex": "32024R2748",
      "date": "2024-11-28",
      "summary": "The internal market emergency regulation of 9 October 2024, published on 8 November 2024, added points (28) and (29) to Article 3 (crisis-relevant goods, internal market emergency mode) and inserted Chapter Va (Articles 43a to 43e): prioritised notified-body assessment, a Member State authorisation to place designated subsystems and safety components on the market without the notified-body procedure and without CE marking, a presumption of conformity based on listed standards or common specifications, and prioritised market surveillance with mutual assistance, all only while an internal market emergency mode under Regulation (EU) 2024/2747 is active; it entered into force on 28 November 2024 and applies from 29 May 2026. A corrigendum of 22 April 2025 corrected Article 43d(6).",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748 · Art. 2 and Art. 7; https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · Art. 3, points (28) and (29), and Art. 43a to Art. 43e"
    }
  ],
  "scope": {
    "appliesTo": [
      "New cableway installations designed to transport persons, where the traction is provided by cables positioned along the line of travel: cable cars (carriers suspended from and propelled by one or more cables), drag lifts (passengers with appropriate equipment towed along a prepared track) and funicular railways (carriers hauled by one or more ropes along a track on the ground or on fixed structures)",
      "Modifications of existing cableway installations that require a new authorisation for entry into service",
      "Subsystems intended to be incorporated into a cableway installation: the six Annex I groups (cables and cable connections; drives and brakes; mechanical equipment; vehicles; electrotechnical devices; rescue equipment)",
      "Safety components: any component of equipment or device intended to be incorporated into a subsystem or a cableway installation to ensure a safety function, the failure of which endangers passengers, operating personnel or third parties",
      "The economic operators for subsystems and safety components (manufacturer, authorised representative, importer, distributor) and the person responsible for the cableway installation, determined by the Member State under national law"
    ],
    "derived": [
      "Subsystems and safety components that conform to harmonised standards, or parts of them, whose references are published in the Official Journal are presumed to conform to the Annex II essential requirements those standards cover; the same presumption applies to installations (Art. 5(3) and Art. 17)",
      "An importer or distributor that places a subsystem or safety component on the market under its own name or trade mark, or modifies one already placed on the market in a way that may affect compliance, is treated as the manufacturer (Art. 15)",
      "Whoever incorporates a subsystem or safety component it has manufactured or had manufactured into a cableway installation is a manufacturer, not only whoever sells it (Art. 3, point (13))",
      "Safety components incorporated as spare parts must satisfy the essential requirements and interact smoothly with the other parts of the installation (Annex II, point 2.6.4)",
      "Where a subsystem or safety component is also subject to other Union acts requiring an EU declaration of conformity, a single declaration covering all of them is drawn up (Art. 19(3))",
      "Member States may lay down additional requirements to protect persons, in particular workers, when using the installations, as long as this does not modify the installations in a manner not covered by the regulation (Art. 5(4))"
    ],
    "categories": [
      {
        "id": "cableway-installation-new",
        "label": "New cableway installation designed to transport persons (cable car, gondola, chairlift, drag lift, funicular)"
      },
      {
        "id": "cableway-modification",
        "label": "Modification of an existing cableway installation that requires a new authorisation for entry into service"
      },
      {
        "id": "subsystem",
        "label": "Subsystem for a cableway installation (cables, drives and brakes, mechanical equipment, vehicles, electrotechnical devices, rescue equipment)"
      },
      {
        "id": "safety-component",
        "label": "Safety component for a subsystem or cableway installation (rope grips, brakes, monitoring and safety devices, suspension gear and similar)"
      },
      {
        "id": "installation-in-service-before-2018",
        "label": "Cableway installation installed, or subsystem or safety component placed on the market, before 21 April 2018 under Directive 2000/9/EC"
      },
      {
        "id": "lift",
        "label": "Lift covered by the Lifts Directive 2014/33/EU"
      },
      {
        "id": "historic-installation",
        "label": "Historic, cultural or heritage installation in service since before 1 January 1986 without significant changes in design or construction"
      },
      {
        "id": "agricultural-forestry-installation",
        "label": "Installation intended for agricultural or forestry purposes"
      },
      {
        "id": "mountain-hut-goods-cableway",
        "label": "Cableway serving mountain shelters and huts, carrying only goods and specifically designated persons"
      },
      {
        "id": "leisure-amusement-equipment",
        "label": "On-site or mobile equipment designed exclusively for leisure and amusement purposes, not as a means of transporting persons"
      },
      {
        "id": "mining-industrial-installation",
        "label": "Mining installation or other industrial on-site installation used for industrial activities"
      },
      {
        "id": "waterborne-installation",
        "label": "Installation in which the users or their carriers are waterborne (cable ferry)"
      },
      {
        "id": "goods-only-ropeway",
        "label": "Material ropeway or cable transport system designed only to carry goods, not persons"
      }
    ],
    "roles": [
      {
        "id": "manufacturer",
        "label": "Manufacturer (including brand owners, installers who incorporate their own components, and authorised representatives acting for a manufacturer)",
        "definition": "Any natural or legal person who manufactures a subsystem or a safety component or who has such a subsystem or safety component designed or manufactured, and markets it under his name or trade mark or incorporates it into a cableway installation; an importer or distributor that sells under its own brand or modifies a subsystem or safety component in a way that may affect compliance is treated as the manufacturer. A manufacturer may appoint by written mandate an authorised representative established in the Union to keep the declaration and technical documentation for 30 years, provide information and cooperate with authorities; the mandate cannot cover the duty to design and manufacture to the essential requirements or to draw up the technical documentation.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 3, points (13) and (14), Art. 12 and Art. 15"
      },
      {
        "id": "importer",
        "label": "Importer",
        "definition": "Any natural or legal person established within the Union who places a subsystem or a safety component from a third country on the Union market.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 3, point (15)"
      },
      {
        "id": "distributor",
        "label": "Distributor (wholesaler, dealer or reseller)",
        "definition": "Any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a subsystem or a safety component available on the market.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 3, point (16)"
      },
      {
        "id": "other",
        "label": "Person responsible for the cableway installation (in Denmark the building owner, bygherren)",
        "definition": "The person responsible for the cableway installation, determined by a Member State in accordance with national law, who carries out or commissions the safety analysis of the planned installation and submits the safety report, the EU declarations of conformity and the other conformity documents to the authority that authorises construction and entry into service. In Denmark this is the building owner (bygherren), who applies to Erhvervsstyrelsen — Sikkerhedsstyrelsen until executive order nr. 490 of 28 May 2026 changed the name throughout the cableway order with effect from 30 May 2026 — for approval before the installation is put into use.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 8(1) and Art. 9(2); https://www.retsinformation.dk/eli/lta/2021/2517 · § 5 and § 6; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
      }
    ],
    "rules": [
      {
        "categories": [
          "lift"
        ],
        "roles": [
          "*"
        ],
        "size": "any",
        "result": "out-of-scope",
        "note": "Lifts covered by Directive 2014/33/EU are excluded from the regulation; the Lifts Directive applies instead.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2(2)(a)"
      },
      {
        "categories": [
          "historic-installation",
          "agricultural-forestry-installation",
          "mountain-hut-goods-cableway",
          "leisure-amusement-equipment",
          "mining-industrial-installation",
          "waterborne-installation"
        ],
        "roles": [
          "*"
        ],
        "size": "any",
        "result": "out-of-scope",
        "note": "Article 2(2) excludes cableway installations categorised by Member States as historic, cultural or heritage installations that entered into service before 1 January 1986, are still in operation and have had no significant changes in design or construction (including subsystems and safety components specifically designed for them), installations intended for agricultural or forestry purposes, cableways serving mountain shelters and huts intended only for goods and specifically designated persons, on-site or mobile equipment exclusively designed for leisure and amusement and not as a means of transporting persons, mining and other industrial on-site installations, and installations in which the users or their carriers are waterborne. Other Union or national safety legislation may still apply.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2(2)(b) to (g)"
      },
      {
        "categories": [
          "goods-only-ropeway"
        ],
        "roles": [
          "*"
        ],
        "size": "any",
        "result": "out-of-scope",
        "note": "The regulation applies to cableway installations designed to transport persons; a cableway installation is defined as a system put into service with the objective of transporting persons. A ropeway built only to carry goods is therefore outside the regulation, although other Union legislation may cover it.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2(1) and Art. 3, point (1)"
      },
      {
        "categories": [
          "installation-in-service-before-2018"
        ],
        "roles": [
          "*"
        ],
        "size": "any",
        "result": "depends",
        "note": "Subsystems and safety components conforming to Directive 2000/9/EC and placed on the market before 21 April 2018, and installations conforming to it and installed before that date, may still be made available and enter into service, and certificates and approval decisions issued for safety components under the directive remain valid. New subsystems and safety components for the installation, spare safety components and any modification that requires a new authorisation fall under the regulation.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2(1), Art. 9(3), Art. 46 and Annex II, point 2.6.4"
      },
      {
        "categories": [
          "subsystem",
          "safety-component"
        ],
        "roles": [
          "manufacturer",
          "importer",
          "distributor"
        ],
        "size": "any",
        "result": "in-scope",
        "note": "Subsystems and safety components may be made available on the market only if they comply with the regulation; the manufacturer, authorised representative, importer and distributor obligations of Articles 11 to 16 apply and contain no company-size threshold.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 4, Art. 11 to Art. 16"
      },
      {
        "categories": [
          "subsystem",
          "safety-component"
        ],
        "roles": [
          "other"
        ],
        "size": "any",
        "result": "in-scope",
        "note": "The person responsible for the installation must draw up the list of subsystems and safety components from the safety analysis, submit their EU declarations of conformity and other conformity documents to the authorising authority, keep copies at the installation and can be identified by every supplier as the recipient for 30 years.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 8(4), Art. 9(2) and Art. 16"
      },
      {
        "categories": [
          "cableway-installation-new",
          "cableway-modification"
        ],
        "roles": [
          "other"
        ],
        "size": "any",
        "result": "in-scope",
        "note": "New installations designed to transport persons and modifications requiring a new authorisation are within the regulation: the person responsible must carry out or commission the safety analysis, draw up the safety report and obtain the national authorisation for construction and entry into service; in Denmark the building owner applies to Erhvervsstyrelsen (Sikkerhedsstyrelsen before 30 May 2026) for approval before the installation is put into use and again for every significant modification, that is an extension, a dismantling, a relocation or any other change affecting the construction, the safety characteristics or the safety profile of the installation.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2(1), Art. 8 and Art. 9; https://www.retsinformation.dk/eli/lta/2021/2517 · § 6 and § 7; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
      },
      {
        "categories": [
          "cableway-installation-new",
          "cableway-modification"
        ],
        "roles": [
          "manufacturer",
          "importer",
          "distributor"
        ],
        "size": "any",
        "result": "in-scope",
        "note": "An economic operator that supplies or incorporates subsystems and safety components into a new installation or a modification carries the Article 11 to 16 obligations for those subsystems and safety components, and whoever incorporates a subsystem or safety component it has made or had made is a manufacturer; the installation-level safety analysis and authorisation rest with the person responsible for the installation.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 3, point (13), Art. 8(1) and Art. 11 to Art. 16"
      },
      {
        "categories": [
          "*"
        ],
        "roles": [
          "*"
        ],
        "size": "any",
        "result": "depends",
        "note": "Whether the regulation applies turns on whether the installation is designed to transport persons, whether an Article 2(2) exclusion applies, whether the product is a subsystem or safety component, when it was placed on the market or installed, and which role the operator holds.",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2 and Art. 3"
      }
    ]
  },
  "obligations": {
    "manufacturer": [
      {
        "text": "Ensure that subsystems and safety components you place on the market or incorporate into a cableway installation are designed and manufactured in accordance with the Annex II essential requirements, including dimensioning for all foreseeable stresses, safe assembly, integrity of safety components so that their failure is highly improbable, fire and lightning protection, safety devices, maintainability and the specific requirements for cables, drives, brakes, vehicles and towing devices.",
        "id": "cir-mfr-ensure-subsystems-safety",
        "kind": "evidence",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 6, Art. 11(1) and Annex II"
      },
      {
        "text": "Draw up the Annex VIII technical documentation (general description, drawings and diagrams, the harmonised standards applied in full or in part or the solutions adopted instead, design calculations and test reports, a copy of the instructions and, for subsystems, the EU declarations of conformity of the safety components incorporated) and submit the subsystem or safety component to one of the Article 18 procedures: EU-type examination (Module B, Annex III) combined with conformity to type based on quality assurance of the production process (Module D, Annex IV) or on subsystem or safety component verification (Module F, Annex V), unit verification (Module G, Annex VI), or full quality assurance plus design examination (Module H1, Annex VII); every route involves a notified body.",
        "id": "cir-mfr-draw-annex-viii",
        "kind": "evidence",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "technical-documentation",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(2), Art. 18 and Annexes III to VIII"
      },
      {
        "text": "Draw up the Annex VIII technical documentation: a general description, drawings and diagrams, the harmonised standards applied in full or in part or the solutions adopted instead, design calculations and test reports, a copy of the instructions and, for subsystems, the EU declarations of conformity of the safety components incorporated.",
        "id": "cir-mfr-draw-technical-documentation",
        "kind": "evidence",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "technical-documentation",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(2) and Annex VIII"
      },
      {
        "text": "Before placing the subsystem or safety component on the market, submit it to an Article 18 procedure: EU-type examination (Module B) with Module D or F, unit verification (Module G), or full quality assurance plus design examination (Module H1); every route involves a notified body.",
        "id": "cir-mfr-carry-out-conformity-assessment",
        "kind": "procedure",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(2), Art. 18 and Annexes III to VII"
      },
      {
        "text": "Draw up the EU declaration of conformity following the Annex IX model, containing the elements of the module used, kept continuously updated, translated into the languages required by the Member State where the product is placed or made available, and as a single declaration where other Union acts also require one; affix the CE marking visibly, legibly and indelibly before placing on the market, followed by the identification number of the notified body involved in the production control phase.",
        "id": "cir-mfr-draw-declaration-conformity",
        "kind": "evidence",
        "level": "product-market",
        "timing": "before-market",
        "sharedKey": "declaration-of-conformity",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(2), Art. 19, Art. 21 and Annex IX"
      },
      {
        "text": "Draw up the EU declaration of conformity following the Annex IX model with the elements of the module used, keep it continuously updated, translate it into the languages the Member State requires, and make it a single declaration where other Union acts also require one.",
        "id": "cir-mfr-draw-eu-declaration",
        "kind": "evidence",
        "level": "product-market",
        "timing": "before-market",
        "sharedKey": "declaration-of-conformity",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(2), Art. 19 and Annex IX"
      },
      {
        "text": "Affix the CE marking visibly, legibly and indelibly before placing the subsystem or safety component on the market, followed by the identification number of the notified body involved in the production control phase.",
        "id": "cir-mfr-affix-ce-marking",
        "kind": "mark",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "ce-marking",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(2) and Art. 21"
      },
      {
        "text": "Keep the technical documentation and the EU declaration of conformity for 30 years after the subsystem or safety component was placed on the market, together with the module records (EU-type examination certificate, quality system approvals, certificates of conformity) for the same period.",
        "id": "cir-mfr-keep-technical-documentation",
        "kind": "standing",
        "level": "product",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(3), Annex III, point 9, Annex IV, point 6, Annex V, point 4.2, Annex VI, point 3.2, and Annex VII, point 6"
      },
      {
        "text": "Keep series production in conformity, taking account of changes in design or characteristics and in the harmonised standards or technical specifications referenced, and where the risks warrant it sample-test subsystems and safety components made available, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors of the monitoring.",
        "id": "cir-mfr-keep-series-production",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(4)"
      },
      {
        "text": "Keep series production of the subsystem or safety component in conformity, taking account of changes in its design or characteristics and in the harmonised standards or technical specifications by reference to which conformity is declared.",
        "id": "cir-mfr-keep-series-conformity",
        "kind": "standing",
        "level": "product",
        "timing": "ongoing",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(4)"
      },
      {
        "text": "Where the risks warrant it, sample-test subsystems and safety components made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.",
        "id": "cir-mfr-sample-test-complaints",
        "kind": "procedure",
        "level": "company",
        "timing": "ongoing",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(4)"
      },
      {
        "text": "Mark each subsystem or safety component with a type, batch or serial number or other identifier and with your name, registered trade name or trade mark and a single postal contact address, in a language easily understood by users and authorities, or on the packaging or an accompanying document where the size or nature does not allow it; accompany it with a copy of the EU declaration of conformity (one copy per batch or consignment delivered to a single operator or user is enough) and with clear instructions and safety information in the language the Member State determines, which in Denmark means Danish.",
        "id": "cir-mfr-mark-subsystem-safety",
        "kind": "mark",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "identification-and-address",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(5), Art. 11(6) and Art. 11(7); https://www.retsinformation.dk/eli/lta/2021/2517 · § 8"
      },
      {
        "text": "Mark each subsystem or safety component with a type, batch or serial number or other identifier and with your name, registered trade name or trade mark and a single postal contact address, in a language easily understood by users and authorities, or on the packaging or an accompanying document where size or nature does not allow it.",
        "id": "cir-mfr-mark-type-name-address",
        "kind": "mark",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "identification-and-address",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(5) and Art. 11(6)"
      },
      {
        "text": "Accompany each subsystem or safety component with a copy of the EU declaration of conformity; one copy per batch or consignment delivered to a single operator or user is enough.",
        "id": "cir-mfr-accompany-declaration-copy",
        "kind": "evidence",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(7)"
      },
      {
        "text": "Supply clear instructions and safety information with each subsystem or safety component in the language the Member State determines, which in Denmark means Danish.",
        "id": "cir-mfr-supply-instructions-safety",
        "kind": "evidence",
        "level": "product-market",
        "timing": "before-market",
        "sharedKey": "instructions-and-safety-information",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(7); https://www.retsinformation.dk/eli/lta/2021/2517 · § 8"
      },
      {
        "text": "If you consider or have reason to believe that a subsystem or safety component you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent national authorities of the Member States where you made it available; on reasoned request provide all conformity information in a language the authority understands and cooperate on risk-elimination measures.",
        "id": "cir-mfr-immediately-bring-conformity",
        "kind": "submission",
        "level": "product",
        "timing": "on-event",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(8) and Art. 11(9)"
      },
      {
        "text": "If you consider or have reason to believe that a subsystem or safety component you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent national authorities of the Member States where you made it available.",
        "id": "cir-mfr-correct-withdraw-recall",
        "kind": "submission",
        "level": "product",
        "timing": "on-event",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(8)"
      },
      {
        "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the subsystem or safety component, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks it poses.",
        "id": "cir-mfr-provide-information-request",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "authority-cooperation",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(9)"
      },
      {
        "text": "Be able to identify, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component; if you appoint an authorised representative, give it a written mandate that at least covers keeping the declaration and technical documentation for 30 years, providing information on request and cooperating with the authorities, while the design and manufacturing duties and the drawing up of the technical documentation stay with you.",
        "id": "cir-mfr-able-identify-years",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 12 and Art. 16"
      },
      {
        "text": "Be able to identify to the market surveillance authorities, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component.",
        "id": "cir-mfr-identify-supply-chain",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 16"
      },
      {
        "text": "If you appoint an authorised representative, give it a written mandate that at least covers keeping the EU declaration of conformity and the technical documentation for 30 years, providing information on request and cooperating with the authorities; the design and manufacturing duties and the drawing up of the technical documentation stay with you.",
        "id": "cir-mfr-give-written-mandate",
        "kind": "evidence",
        "level": "company",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 12"
      }
    ],
    "importer": [
      {
        "text": "Place only compliant subsystems and safety components on the market, and before doing so check that the manufacturer carried out the Article 18 conformity assessment, drew up the technical documentation, affixed the CE marking, supplied the EU declaration of conformity, instructions, safety information and other required documents, and applied the identification and address markings; hold back non-conforming products and inform the manufacturer and the market surveillance authorities where they present a risk.",
        "id": "cir-imp-place-compliant-subsystems",
        "kind": "verification",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(1) and Art. 13(2)"
      },
      {
        "text": "Indicate your name, registered trade name or trade mark and a postal contact address on the subsystem or safety component or, where not possible, on its packaging or in an accompanying document, in a language easily understood by users and authorities, and keep any website you name accessible and up to date.",
        "id": "cir-imp-indicate-name-registered",
        "kind": "mark",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "identification-and-address",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(3)"
      },
      {
        "text": "Ensure the subsystem or safety component is accompanied by instructions and safety information in the language determined by the Member State, in Denmark Danish.",
        "id": "cir-imp-ensure-subsystem-safety",
        "kind": "verification",
        "level": "product-market",
        "timing": "before-market",
        "sharedKey": "instructions-and-safety-information",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(4); https://www.retsinformation.dk/eli/lta/2021/2517 · § 8"
      },
      {
        "text": "Keep storage and transport conditions from jeopardising compliance with the essential requirements, and where the risks warrant it sample-test, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors.",
        "id": "cir-imp-keep-storage-transport",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(5) and Art. 13(6)"
      },
      {
        "text": "While a subsystem or safety component is under your responsibility, keep its storage and transport conditions from jeopardising its compliance with the essential requirements.",
        "id": "cir-imp-keep-storage-conditions",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(5)"
      },
      {
        "text": "Where the risks warrant it, sample-test subsystems and safety components made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.",
        "id": "cir-imp-sample-test-complaints",
        "kind": "procedure",
        "level": "company",
        "timing": "ongoing",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(6)"
      },
      {
        "text": "If a subsystem or safety component you placed on the market does not conform, immediately take corrective measures, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States concerned.",
        "id": "cir-imp-immediately-take-corrective",
        "kind": "submission",
        "level": "product",
        "timing": "on-event",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(7)"
      },
      {
        "text": "Keep a copy of the EU declaration of conformity at the disposal of the market surveillance authorities for 30 years and ensure the technical documentation can be produced on request; provide conformity information on reasoned request, cooperate on risk-elimination measures, and be able to identify your suppliers and customers for 30 years.",
        "id": "cir-imp-keep-copy-declaration",
        "kind": "standing",
        "level": "product",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(8), Art. 13(9) and Art. 16"
      },
      {
        "text": "Keep a copy of the EU declaration of conformity at the disposal of the market surveillance authorities for 30 years after the subsystem or safety component was placed on the market, and ensure the technical documentation can be made available to them on request.",
        "id": "cir-imp-keep-declaration-copy",
        "kind": "standing",
        "level": "product",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(8)"
      },
      {
        "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the subsystem or safety component, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks it poses.",
        "id": "cir-imp-provide-information-request",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "authority-cooperation",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 13(9)"
      },
      {
        "text": "Be able to identify to the market surveillance authorities, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component.",
        "id": "cir-imp-identify-supply-chain",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 16"
      },
      {
        "text": "If you place a subsystem or safety component on the market under your own name or trade mark, or modify one already on the market in a way that may affect compliance, you carry the manufacturer's obligations under Article 11.",
        "id": "cir-imp-modify-already-market",
        "kind": "status",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 15"
      }
    ],
    "distributor": [
      {
        "text": "Act with due care and, before making a subsystem or safety component available, verify that it bears the CE marking and is accompanied by a copy of the EU declaration of conformity, instructions, safety information and other required documents in the language of the Member State, and that the manufacturer and importer have applied their identification and address markings; hold back non-conforming products and inform the manufacturer or importer and the market surveillance authorities where they present a risk.",
        "id": "cir-dist-act-due-care",
        "kind": "verification",
        "level": "product-market",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 14(1) and Art. 14(2)"
      },
      {
        "text": "Keep storage and transport conditions from jeopardising compliance with the Annex II essential requirements while the product is under your responsibility.",
        "id": "cir-dist-keep-storage-transport",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 14(3)"
      },
      {
        "text": "If a subsystem or safety component you made available does not conform, make sure corrective measures are taken to bring it into conformity, withdraw or recall it, and where it presents a risk immediately inform the competent authorities of the Member States concerned.",
        "id": "cir-dist-make-sure-corrective",
        "kind": "submission",
        "level": "product",
        "timing": "on-event",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 14(4)"
      },
      {
        "text": "On reasoned request, provide the information and documentation demonstrating conformity, cooperate on risk-elimination measures, and be able to identify your suppliers and the economic operators and persons responsible for installations you supplied for 30 years.",
        "id": "cir-dist-provide-information-documentation",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "authority-cooperation",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 14(5) and Art. 16"
      },
      {
        "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the subsystem or safety component, and cooperate with it on any action to eliminate the risks posed by products you made available.",
        "id": "cir-dist-provide-information-request",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "authority-cooperation",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 14(5)"
      },
      {
        "text": "Be able to identify to the market surveillance authorities, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component.",
        "id": "cir-dist-identify-supply-chain",
        "kind": "standing",
        "level": "company",
        "timing": "ongoing",
        "sharedKey": "record-keeping-30y",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 16"
      },
      {
        "text": "If you sell under your own name or trade mark or modify a subsystem or safety component in a way that may affect compliance, you take on the manufacturer's obligations.",
        "id": "cir-dist-take-manufacturers-obligations",
        "kind": "status",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 15"
      }
    ],
    "other": [
      {
        "text": "Carry out, or have carried out, a safety analysis of the planned installation that covers all envisaged modes of operation, follows a recognised or established method, reflects the state of the art and the complexity of the installation, takes account of the local surroundings and the most adverse situations, covers all safety aspects of design, construction and entry into service and identifies risks known from past experience, including the safety devices and their fail-safe, redundant or evaluated behaviour.",
        "id": "cir-oth-carry-out-have",
        "kind": "procedure",
        "level": "product",
        "timing": "before-market",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 8(1), Art. 8(2) and Art. 8(3)"
      },
      {
        "text": "Use the safety analysis to draw up the inventory of risks and dangerous situations, the measures envisaged to deal with them and the list of subsystems and safety components to be incorporated, and record the result in a safety report.",
        "id": "cir-oth-use-safety-analysis",
        "kind": "evidence",
        "level": "product",
        "timing": "before-market",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 8(4) and Art. 8(5)"
      },
      {
        "text": "Submit the safety report, the EU declarations of conformity and the other conformity documents for the subsystems and safety components, and the documentation on the characteristics of the installation including operating restrictions and full details for servicing, supervision, adjustment and maintenance, to the authority that authorises the installation, and keep a copy of those documents at the installation; in Denmark the building owner sends the safety report, the EU declaration of conformity, the other conformity documents and the documentation on the characteristics of the installation to Erhvervsstyrelsen (Sikkerhedsstyrelsen before 30 May 2026) no later than the start of construction and obtains approval before the installation is put into use; the safety report, the declaration and the other conformity documents must be in Danish or English.",
        "id": "cir-oth-submit-safety-report",
        "kind": "submission",
        "level": "product",
        "timing": "before-market",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 9(1) and Art. 9(2); https://www.retsinformation.dk/eli/lta/2021/2517 · § 6; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
      },
      {
        "text": "Where important characteristics, subsystems or safety components of an existing installation are modified in a way that requires a new authorisation, ensure the modification and its repercussions on the installation as a whole satisfy the Annex II essential requirements; in Denmark every significant modification (extension, dismantling, relocation or any change affecting the construction, safety characteristics or safety profile) needs a new approval from Erhvervsstyrelsen, while minor changes that keep the scope and the integrity of the installation, so that it still complies with the rules that applied when it was originally built, do not.",
        "id": "cir-oth-subsystems-safety-components",
        "kind": "submission",
        "level": "product",
        "timing": "on-event",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 9(3); https://www.retsinformation.dk/eli/lta/2021/2517 · § 7; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
      },
      {
        "text": "Operate the installation only under the conditions set out in the safety report, with qualified persons and adequate resources, an instruction manual in the language of the Member State where the installation is built and clearly indicated inspection intervals for safety components; a Member State that finds an authorised installation liable to endanger persons or property will restrict or prohibit its operation.",
        "id": "cir-oth-operate-installation-conditions",
        "kind": "standing",
        "level": "product",
        "timing": "ongoing",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 10 and Annex II, points 2.6.3, 7.1.1 and 7.1.2"
      },
      {
        "text": "Fit only safety components as spare parts that satisfy the essential requirements and interact smoothly with the other parts of the installation, and expect every supplier to be able to name you as the recipient of its subsystems and safety components for 30 years.",
        "id": "cir-oth-fit-safety-components",
        "kind": "verification",
        "level": "product",
        "timing": "on-event",
        "retired": "2026-09-24",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 16(b) and Annex II, point 2.6.4"
      },
      {
        "text": "Carry out, or have carried out, a safety analysis of the planned cableway installation that takes into account all envisaged modes of operation, follows a recognised or established method, reflects the state of the art and the complexity of the installation, takes account of the local surroundings and the most adverse situations, covers all safety aspects of design, construction and entry into service, makes it possible to identify from past experience the risks liable to occur in operation, and covers the safety devices and their effects on the installation.",
        "id": "cir-oth-carry-out-safety-analysis",
        "kind": "procedure",
        "level": "product",
        "timing": "before-market",
        "sharedKey": "risk-analysis",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 8(1), Art. 8(2) and Art. 8(3)"
      },
      {
        "text": "Use the safety analysis to draw up the inventory of risks and dangerous situations, the measures envisaged to deal with them and the list of subsystems and safety components to be incorporated, and record its result in a safety report.",
        "id": "cir-oth-draw-safety-report",
        "kind": "evidence",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 8(4) and Art. 8(5)"
      },
      {
        "text": "Submit the safety report, the EU declarations of conformity and the other conformity documents for the subsystems and safety components, and the documentation on the characteristics of the installation, including the conditions and restrictions on operation and full details for servicing, supervision, adjustment and maintenance, to the authority or body that authorises the installation; in Denmark the building owner sends them to Erhvervsstyrelsen no later than the start of construction, the first three in Danish or English, and obtains its approval before the installation is put into use.",
        "id": "cir-oth-submit-authorisation-documents",
        "kind": "submission",
        "level": "product",
        "timing": "before-market",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 9(2), first and second sentences; https://www.retsinformation.dk/eli/lta/2021/2517 · § 6; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
      },
      {
        "text": "Keep a copy of the safety report, the EU declarations of conformity, the other conformity documents and the documentation on the characteristics of the installation at the cableway installation.",
        "id": "cir-oth-keep-documents-installation",
        "kind": "standing",
        "level": "product",
        "timing": "ongoing",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 9(2), last sentence"
      },
      {
        "text": "Where important characteristics, subsystems or safety components of an existing installation are modified in a way that requires a new authorisation for entry into service, obtain that authorisation for a modification that, with its repercussions on the installation as a whole, satisfies the Annex II essential requirements; in Denmark every significant modification (an extension, a dismantling, a relocation or any other change affecting the construction, the safety characteristics or the safety profile) needs a new approval from Erhvervsstyrelsen, while minor changes that keep the scope and the integrity of the installation do not.",
        "id": "cir-oth-reapply-after-modification",
        "kind": "submission",
        "level": "product",
        "timing": "on-event",
        "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 9(3); https://www.retsinformation.dk/eli/lta/2021/2517 · § 7; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
      }
    ]
  },
  "requirements": [
    {
      "id": "cir-mfr-ensure-subsystems-safety",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product",
      "timing": "before-market",
      "text": "Ensure that subsystems and safety components you place on the market or incorporate into a cableway installation are designed and manufactured in accordance with the Annex II essential requirements, including dimensioning for all foreseeable stresses, safe assembly, integrity of safety components so that their failure is highly improbable, fire and lightning protection, safety devices, maintainability and the specific requirements for cables, drives, brakes, vehicles and towing devices.",
      "article": "Art. 6, Art. 11(1) and Annex II",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-draw-annex-viii",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "technical-documentation",
      "retired": "2026-09-24",
      "text": "Draw up the Annex VIII technical documentation (general description, drawings and diagrams, the harmonised standards applied in full or in part or the solutions adopted instead, design calculations and test reports, a copy of the instructions and, for subsystems, the EU declarations of conformity of the safety components incorporated) and submit the subsystem or safety component to one of the Article 18 procedures: EU-type examination (Module B, Annex III) combined with conformity to type based on quality assurance of the production process (Module D, Annex IV) or on subsystem or safety component verification (Module F, Annex V), unit verification (Module G, Annex VI), or full quality assurance plus design examination (Module H1, Annex VII); every route involves a notified body.",
      "article": "Art. 11(2), Art. 18 and Annexes III to VIII",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-draw-technical-documentation",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "technical-documentation",
      "text": "Draw up the Annex VIII technical documentation: a general description, drawings and diagrams, the harmonised standards applied in full or in part or the solutions adopted instead, design calculations and test reports, a copy of the instructions and, for subsystems, the EU declarations of conformity of the safety components incorporated.",
      "article": "Art. 11(2) and Annex VIII",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-carry-out-conformity-assessment",
      "role": "manufacturer",
      "kind": "procedure",
      "level": "product",
      "timing": "before-market",
      "text": "Before placing the subsystem or safety component on the market, submit it to an Article 18 procedure: EU-type examination (Module B) with Module D or F, unit verification (Module G), or full quality assurance plus design examination (Module H1); every route involves a notified body.",
      "article": "Art. 11(2), Art. 18 and Annexes III to VII",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-draw-declaration-conformity",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product-market",
      "timing": "before-market",
      "sharedKey": "declaration-of-conformity",
      "retired": "2026-09-24",
      "text": "Draw up the EU declaration of conformity following the Annex IX model, containing the elements of the module used, kept continuously updated, translated into the languages required by the Member State where the product is placed or made available, and as a single declaration where other Union acts also require one; affix the CE marking visibly, legibly and indelibly before placing on the market, followed by the identification number of the notified body involved in the production control phase.",
      "article": "Art. 11(2), Art. 19, Art. 21 and Annex IX",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-draw-eu-declaration",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product-market",
      "timing": "before-market",
      "sharedKey": "declaration-of-conformity",
      "text": "Draw up the EU declaration of conformity following the Annex IX model with the elements of the module used, keep it continuously updated, translate it into the languages the Member State requires, and make it a single declaration where other Union acts also require one.",
      "article": "Art. 11(2), Art. 19 and Annex IX",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-affix-ce-marking",
      "role": "manufacturer",
      "kind": "mark",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "ce-marking",
      "text": "Affix the CE marking visibly, legibly and indelibly before placing the subsystem or safety component on the market, followed by the identification number of the notified body involved in the production control phase.",
      "article": "Art. 11(2) and Art. 21",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-keep-technical-documentation",
      "role": "manufacturer",
      "kind": "standing",
      "level": "product",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "text": "Keep the technical documentation and the EU declaration of conformity for 30 years after the subsystem or safety component was placed on the market, together with the module records (EU-type examination certificate, quality system approvals, certificates of conformity) for the same period.",
      "article": "Art. 11(3), Annex III, point 9, Annex IV, point 6, Annex V, point 4.2, Annex VI, point 3.2, and Annex VII, point 6",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-keep-series-production",
      "role": "manufacturer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "retired": "2026-09-24",
      "text": "Keep series production in conformity, taking account of changes in design or characteristics and in the harmonised standards or technical specifications referenced, and where the risks warrant it sample-test subsystems and safety components made available, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors of the monitoring.",
      "article": "Art. 11(4)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-keep-series-conformity",
      "role": "manufacturer",
      "kind": "standing",
      "level": "product",
      "timing": "ongoing",
      "text": "Keep series production of the subsystem or safety component in conformity, taking account of changes in its design or characteristics and in the harmonised standards or technical specifications by reference to which conformity is declared.",
      "article": "Art. 11(4)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-sample-test-complaints",
      "role": "manufacturer",
      "kind": "procedure",
      "level": "company",
      "timing": "ongoing",
      "text": "Where the risks warrant it, sample-test subsystems and safety components made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.",
      "article": "Art. 11(4)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-mark-subsystem-safety",
      "role": "manufacturer",
      "kind": "mark",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "identification-and-address",
      "retired": "2026-09-24",
      "text": "Mark each subsystem or safety component with a type, batch or serial number or other identifier and with your name, registered trade name or trade mark and a single postal contact address, in a language easily understood by users and authorities, or on the packaging or an accompanying document where the size or nature does not allow it; accompany it with a copy of the EU declaration of conformity (one copy per batch or consignment delivered to a single operator or user is enough) and with clear instructions and safety information in the language the Member State determines, which in Denmark means Danish.",
      "article": "Art. 11(5), Art. 11(6) and Art. 11(7); https://www.retsinformation.dk/eli/lta/2021/2517 · § 8",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-mark-type-name-address",
      "role": "manufacturer",
      "kind": "mark",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "identification-and-address",
      "text": "Mark each subsystem or safety component with a type, batch or serial number or other identifier and with your name, registered trade name or trade mark and a single postal contact address, in a language easily understood by users and authorities, or on the packaging or an accompanying document where size or nature does not allow it.",
      "article": "Art. 11(5) and Art. 11(6)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-accompany-declaration-copy",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product",
      "timing": "before-market",
      "text": "Accompany each subsystem or safety component with a copy of the EU declaration of conformity; one copy per batch or consignment delivered to a single operator or user is enough.",
      "article": "Art. 11(7)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-supply-instructions-safety",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "product-market",
      "timing": "before-market",
      "sharedKey": "instructions-and-safety-information",
      "text": "Supply clear instructions and safety information with each subsystem or safety component in the language the Member State determines, which in Denmark means Danish.",
      "article": "Art. 11(7); https://www.retsinformation.dk/eli/lta/2021/2517 · § 8",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-immediately-bring-conformity",
      "role": "manufacturer",
      "kind": "submission",
      "level": "product",
      "timing": "on-event",
      "retired": "2026-09-24",
      "text": "If you consider or have reason to believe that a subsystem or safety component you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent national authorities of the Member States where you made it available; on reasoned request provide all conformity information in a language the authority understands and cooperate on risk-elimination measures.",
      "article": "Art. 11(8) and Art. 11(9)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-correct-withdraw-recall",
      "role": "manufacturer",
      "kind": "submission",
      "level": "product",
      "timing": "on-event",
      "text": "If you consider or have reason to believe that a subsystem or safety component you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent national authorities of the Member States where you made it available.",
      "article": "Art. 11(8)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-provide-information-request",
      "role": "manufacturer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "authority-cooperation",
      "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the subsystem or safety component, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks it poses.",
      "article": "Art. 11(9)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-able-identify-years",
      "role": "manufacturer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "retired": "2026-09-24",
      "text": "Be able to identify, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component; if you appoint an authorised representative, give it a written mandate that at least covers keeping the declaration and technical documentation for 30 years, providing information on request and cooperating with the authorities, while the design and manufacturing duties and the drawing up of the technical documentation stay with you.",
      "article": "Art. 12 and Art. 16",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-identify-supply-chain",
      "role": "manufacturer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "text": "Be able to identify to the market surveillance authorities, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component.",
      "article": "Art. 16",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-mfr-give-written-mandate",
      "role": "manufacturer",
      "kind": "evidence",
      "level": "company",
      "timing": "before-market",
      "text": "If you appoint an authorised representative, give it a written mandate that at least covers keeping the EU declaration of conformity and the technical documentation for 30 years, providing information on request and cooperating with the authorities; the design and manufacturing duties and the drawing up of the technical documentation stay with you.",
      "article": "Art. 12",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-place-compliant-subsystems",
      "role": "importer",
      "kind": "verification",
      "level": "product",
      "timing": "before-market",
      "text": "Place only compliant subsystems and safety components on the market, and before doing so check that the manufacturer carried out the Article 18 conformity assessment, drew up the technical documentation, affixed the CE marking, supplied the EU declaration of conformity, instructions, safety information and other required documents, and applied the identification and address markings; hold back non-conforming products and inform the manufacturer and the market surveillance authorities where they present a risk.",
      "article": "Art. 13(1) and Art. 13(2)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-indicate-name-registered",
      "role": "importer",
      "kind": "mark",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "identification-and-address",
      "text": "Indicate your name, registered trade name or trade mark and a postal contact address on the subsystem or safety component or, where not possible, on its packaging or in an accompanying document, in a language easily understood by users and authorities, and keep any website you name accessible and up to date.",
      "article": "Art. 13(3)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-ensure-subsystem-safety",
      "role": "importer",
      "kind": "verification",
      "level": "product-market",
      "timing": "before-market",
      "sharedKey": "instructions-and-safety-information",
      "text": "Ensure the subsystem or safety component is accompanied by instructions and safety information in the language determined by the Member State, in Denmark Danish.",
      "article": "Art. 13(4); https://www.retsinformation.dk/eli/lta/2021/2517 · § 8",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-keep-storage-transport",
      "role": "importer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "retired": "2026-09-24",
      "text": "Keep storage and transport conditions from jeopardising compliance with the essential requirements, and where the risks warrant it sample-test, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors.",
      "article": "Art. 13(5) and Art. 13(6)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-keep-storage-conditions",
      "role": "importer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "text": "While a subsystem or safety component is under your responsibility, keep its storage and transport conditions from jeopardising its compliance with the essential requirements.",
      "article": "Art. 13(5)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-sample-test-complaints",
      "role": "importer",
      "kind": "procedure",
      "level": "company",
      "timing": "ongoing",
      "text": "Where the risks warrant it, sample-test subsystems and safety components made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.",
      "article": "Art. 13(6)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-immediately-take-corrective",
      "role": "importer",
      "kind": "submission",
      "level": "product",
      "timing": "on-event",
      "text": "If a subsystem or safety component you placed on the market does not conform, immediately take corrective measures, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States concerned.",
      "article": "Art. 13(7)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-keep-copy-declaration",
      "role": "importer",
      "kind": "standing",
      "level": "product",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "retired": "2026-09-24",
      "text": "Keep a copy of the EU declaration of conformity at the disposal of the market surveillance authorities for 30 years and ensure the technical documentation can be produced on request; provide conformity information on reasoned request, cooperate on risk-elimination measures, and be able to identify your suppliers and customers for 30 years.",
      "article": "Art. 13(8), Art. 13(9) and Art. 16",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-keep-declaration-copy",
      "role": "importer",
      "kind": "standing",
      "level": "product",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "text": "Keep a copy of the EU declaration of conformity at the disposal of the market surveillance authorities for 30 years after the subsystem or safety component was placed on the market, and ensure the technical documentation can be made available to them on request.",
      "article": "Art. 13(8)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-provide-information-request",
      "role": "importer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "authority-cooperation",
      "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the subsystem or safety component, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks it poses.",
      "article": "Art. 13(9)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-identify-supply-chain",
      "role": "importer",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "text": "Be able to identify to the market surveillance authorities, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component.",
      "article": "Art. 16",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-imp-modify-already-market",
      "role": "importer",
      "kind": "status",
      "level": "product",
      "timing": "before-market",
      "text": "If you place a subsystem or safety component on the market under your own name or trade mark, or modify one already on the market in a way that may affect compliance, you carry the manufacturer's obligations under Article 11.",
      "article": "Art. 15",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-act-due-care",
      "role": "distributor",
      "kind": "verification",
      "level": "product-market",
      "timing": "before-market",
      "text": "Act with due care and, before making a subsystem or safety component available, verify that it bears the CE marking and is accompanied by a copy of the EU declaration of conformity, instructions, safety information and other required documents in the language of the Member State, and that the manufacturer and importer have applied their identification and address markings; hold back non-conforming products and inform the manufacturer or importer and the market surveillance authorities where they present a risk.",
      "article": "Art. 14(1) and Art. 14(2)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-keep-storage-transport",
      "role": "distributor",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "text": "Keep storage and transport conditions from jeopardising compliance with the Annex II essential requirements while the product is under your responsibility.",
      "article": "Art. 14(3)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-make-sure-corrective",
      "role": "distributor",
      "kind": "submission",
      "level": "product",
      "timing": "on-event",
      "text": "If a subsystem or safety component you made available does not conform, make sure corrective measures are taken to bring it into conformity, withdraw or recall it, and where it presents a risk immediately inform the competent authorities of the Member States concerned.",
      "article": "Art. 14(4)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-provide-information-documentation",
      "role": "distributor",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "authority-cooperation",
      "retired": "2026-09-24",
      "text": "On reasoned request, provide the information and documentation demonstrating conformity, cooperate on risk-elimination measures, and be able to identify your suppliers and the economic operators and persons responsible for installations you supplied for 30 years.",
      "article": "Art. 14(5) and Art. 16",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-provide-information-request",
      "role": "distributor",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "authority-cooperation",
      "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the subsystem or safety component, and cooperate with it on any action to eliminate the risks posed by products you made available.",
      "article": "Art. 14(5)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-identify-supply-chain",
      "role": "distributor",
      "kind": "standing",
      "level": "company",
      "timing": "ongoing",
      "sharedKey": "record-keeping-30y",
      "text": "Be able to identify to the market surveillance authorities, for 30 years, every economic operator that supplied you and every economic operator and person responsible for a cableway installation to whom you supplied a subsystem or safety component.",
      "article": "Art. 16",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-dist-take-manufacturers-obligations",
      "role": "distributor",
      "kind": "status",
      "level": "product",
      "timing": "before-market",
      "text": "If you sell under your own name or trade mark or modify a subsystem or safety component in a way that may affect compliance, you take on the manufacturer's obligations.",
      "article": "Art. 15",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-carry-out-have",
      "role": "other",
      "kind": "procedure",
      "level": "product",
      "timing": "before-market",
      "retired": "2026-09-24",
      "text": "Carry out, or have carried out, a safety analysis of the planned installation that covers all envisaged modes of operation, follows a recognised or established method, reflects the state of the art and the complexity of the installation, takes account of the local surroundings and the most adverse situations, covers all safety aspects of design, construction and entry into service and identifies risks known from past experience, including the safety devices and their fail-safe, redundant or evaluated behaviour.",
      "article": "Art. 8(1), Art. 8(2) and Art. 8(3)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-use-safety-analysis",
      "role": "other",
      "kind": "evidence",
      "level": "product",
      "timing": "before-market",
      "retired": "2026-09-24",
      "text": "Use the safety analysis to draw up the inventory of risks and dangerous situations, the measures envisaged to deal with them and the list of subsystems and safety components to be incorporated, and record the result in a safety report.",
      "article": "Art. 8(4) and Art. 8(5)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-submit-safety-report",
      "role": "other",
      "kind": "submission",
      "level": "product",
      "timing": "before-market",
      "retired": "2026-09-24",
      "text": "Submit the safety report, the EU declarations of conformity and the other conformity documents for the subsystems and safety components, and the documentation on the characteristics of the installation including operating restrictions and full details for servicing, supervision, adjustment and maintenance, to the authority that authorises the installation, and keep a copy of those documents at the installation; in Denmark the building owner sends the safety report, the EU declaration of conformity, the other conformity documents and the documentation on the characteristics of the installation to Erhvervsstyrelsen (Sikkerhedsstyrelsen before 30 May 2026) no later than the start of construction and obtains approval before the installation is put into use; the safety report, the declaration and the other conformity documents must be in Danish or English.",
      "article": "Art. 9(1) and Art. 9(2); https://www.retsinformation.dk/eli/lta/2021/2517 · § 6; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-subsystems-safety-components",
      "role": "other",
      "kind": "submission",
      "level": "product",
      "timing": "on-event",
      "retired": "2026-09-24",
      "text": "Where important characteristics, subsystems or safety components of an existing installation are modified in a way that requires a new authorisation, ensure the modification and its repercussions on the installation as a whole satisfy the Annex II essential requirements; in Denmark every significant modification (extension, dismantling, relocation or any change affecting the construction, safety characteristics or safety profile) needs a new approval from Erhvervsstyrelsen, while minor changes that keep the scope and the integrity of the installation, so that it still complies with the rules that applied when it was originally built, do not.",
      "article": "Art. 9(3); https://www.retsinformation.dk/eli/lta/2021/2517 · § 7; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-operate-installation-conditions",
      "role": "other",
      "kind": "standing",
      "level": "product",
      "timing": "ongoing",
      "retired": "2026-09-24",
      "text": "Operate the installation only under the conditions set out in the safety report, with qualified persons and adequate resources, an instruction manual in the language of the Member State where the installation is built and clearly indicated inspection intervals for safety components; a Member State that finds an authorised installation liable to endanger persons or property will restrict or prohibit its operation.",
      "article": "Art. 10 and Annex II, points 2.6.3, 7.1.1 and 7.1.2",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-fit-safety-components",
      "role": "other",
      "kind": "verification",
      "level": "product",
      "timing": "on-event",
      "retired": "2026-09-24",
      "text": "Fit only safety components as spare parts that satisfy the essential requirements and interact smoothly with the other parts of the installation, and expect every supplier to be able to name you as the recipient of its subsystems and safety components for 30 years.",
      "article": "Art. 16(b) and Annex II, point 2.6.4",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-carry-out-safety-analysis",
      "role": "other",
      "kind": "procedure",
      "level": "product",
      "timing": "before-market",
      "sharedKey": "risk-analysis",
      "text": "Carry out, or have carried out, a safety analysis of the planned cableway installation that takes into account all envisaged modes of operation, follows a recognised or established method, reflects the state of the art and the complexity of the installation, takes account of the local surroundings and the most adverse situations, covers all safety aspects of design, construction and entry into service, makes it possible to identify from past experience the risks liable to occur in operation, and covers the safety devices and their effects on the installation.",
      "article": "Art. 8(1), Art. 8(2) and Art. 8(3)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-draw-safety-report",
      "role": "other",
      "kind": "evidence",
      "level": "product",
      "timing": "before-market",
      "text": "Use the safety analysis to draw up the inventory of risks and dangerous situations, the measures envisaged to deal with them and the list of subsystems and safety components to be incorporated, and record its result in a safety report.",
      "article": "Art. 8(4) and Art. 8(5)",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-submit-authorisation-documents",
      "role": "other",
      "kind": "submission",
      "level": "product",
      "timing": "before-market",
      "text": "Submit the safety report, the EU declarations of conformity and the other conformity documents for the subsystems and safety components, and the documentation on the characteristics of the installation, including the conditions and restrictions on operation and full details for servicing, supervision, adjustment and maintenance, to the authority or body that authorises the installation; in Denmark the building owner sends them to Erhvervsstyrelsen no later than the start of construction, the first three in Danish or English, and obtains its approval before the installation is put into use.",
      "article": "Art. 9(2), first and second sentences; https://www.retsinformation.dk/eli/lta/2021/2517 · § 6; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-keep-documents-installation",
      "role": "other",
      "kind": "standing",
      "level": "product",
      "timing": "ongoing",
      "text": "Keep a copy of the safety report, the EU declarations of conformity, the other conformity documents and the documentation on the characteristics of the installation at the cableway installation.",
      "article": "Art. 9(2), last sentence",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "id": "cir-oth-reapply-after-modification",
      "role": "other",
      "kind": "submission",
      "level": "product",
      "timing": "on-event",
      "text": "Where important characteristics, subsystems or safety components of an existing installation are modified in a way that requires a new authorisation for entry into service, obtain that authorisation for a modification that, with its repercussions on the installation as a whole, satisfies the Annex II essential requirements; in Denmark every significant modification (an extension, a dismantling, a relocation or any other change affecting the construction, the safety characteristics or the safety profile) needs a new approval from Erhvervsstyrelsen, while minor changes that keep the scope and the integrity of the installation do not.",
      "article": "Art. 9(3); https://www.retsinformation.dk/eli/lta/2021/2517 · § 7; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3",
      "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    }
  ],
  "requirementsHash": "d4573580f240a8fa",
  "penalties": {
    "text": "Member States lay down the rules on penalties for infringements by economic operators of the regulation and of the national law adopted under it; the penalties must be effective, proportionate and dissuasive, may include criminal penalties for serious infringements and may be increased for repeat infringements, and the rules had to be notified to the Commission by 21 March 2018. Market surveillance authorities evaluate subsystems and safety components that present a risk to persons or property, require corrective action, withdrawal or recall within a period commensurate with the risk, inform the notified body, and if the operator fails to act prohibit or restrict the making available, withdraw or recall the product and notify the Commission and the other Member States; compliant products that still present a risk can be treated the same way, and Member States restrict or prohibit the operation of an authorised installation that endangers persons or property. Formal non-compliance, such as CE marking or the notified-body number missing or wrongly affixed, a missing or incorrect EU declaration of conformity, incomplete technical documentation or missing identification and address information, must be ended and otherwise leads to restriction, prohibition, withdrawal or recall. In Denmark, executive order nr. 2517 of 14 December 2021 on cableway installations, as amended by executive order nr. 490 of 28 May 2026, punishes with a fine, unless a higher penalty is due under other legislation, whoever puts an installation into use or incorporates subsystems or safety components in breach of § 3, makes subsystems or safety components available in breach of § 4, breaches the Danish language requirements of § 8, or fails to apply for the entry-into-service approval required by §§ 6 and 7. For breaches of §§ 3, 4 and 8 the penalty can rise to imprisonment for up to 2 years under aggravating circumstances — the infringement created a danger to safety or health, it caused an accident with serious injury or death, it is a repeat offence, it was committed as part of a systematic infringement for financial gain, or the trader tried to circumvent or evade the control authority's control — and companies can be held criminally liable under Chapter 5 of the Danish criminal code. Erhvervsstyrelsen, which absorbed Sikkerhedsstyrelsen in January 2026 and runs its Markedsovervågning department, is the control authority under the Danish product act, which lists the cableway regulation in § 2, stk. 1, nr. 39, and whose § 37, stk. 3 and 4, is the basis for those penalties.",
    "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · Art. 10(2), Art. 40, Art. 42, Art. 43 and Art. 45; https://www.retsinformation.dk/eli/lta/2021/2517 · § 13; https://www.retsinformation.dk/eli/lta/2026/490 · §§ 1 og 2; https://www.retsinformation.dk/eli/lta/2026/22 · § 2, stk. 1, nr. 39, § 9 and § 37; https://www.sik.dk/erhverv/produkter/elevatorer-og-tovbaner/kontrol-og-tilsyn/kontrol-elevatorer-og-tovbaner"
  },
  "checklist": [
    "Confirm the installation is designed to transport persons by cable traction and that none of the Article 2(2) exclusions applies (lifts, historic installations from before 1986, agricultural and forestry, mountain-hut goods cableways, leisure equipment, mining and industrial, waterborne).",
    "Classify each product as a subsystem (Annex I) or a safety component (Article 3, point (4)) and decide your role, remembering that incorporating your own components into an installation or selling under your own brand makes you the manufacturer (Article 3, point (13), and Article 15).",
    "For a new installation or a modification needing a new authorisation, have the safety analysis carried out and the safety report drawn up, with the list of subsystems and safety components (Article 8).",
    "Identify the harmonised standards published in the Official Journal that cover the product to obtain the presumption of conformity with Annex II, or document the alternative solutions (Article 17).",
    "Choose the conformity assessment route, Module B with D or F, Module G or Module H1, and lodge the application with a single notified body of your choice (Article 18 and Annexes III to VII).",
    "Compile the Annex VIII technical documentation, including the risk analysis, drawings, standards applied, calculations, test reports, the instructions and, for subsystems, the declarations of the safety components incorporated.",
    "Draw up the Annex IX EU declaration of conformity per model, translated into the languages of the Member States of sale, and affix the CE marking followed by the notified-body number before placing on the market (Articles 19 and 21).",
    "Mark the identifier, the manufacturer's and importer's name and address, and supply the declaration, instructions and safety information in the required language, in Denmark Danish (Articles 11(5) to 11(7), 13(3) and 13(4)).",
    "Set up 30-year retention of the technical documentation, declaration, certificates and supplier and customer records, and the corrective-action and notification procedure (Articles 11(3), 11(8), 13(7), 14(4) and 16).",
    "For a Danish installation, apply to Erhvervsstyrelsen for approval before entry into service, sending the safety report, the declarations, the other conformity documents and the documentation on the characteristics of the installation by the start of construction — the first three in Danish or English — and reapply after every significant modification (executive order nr. 2517 of 14 December 2021, §§ 6 and 7, as amended by executive order nr. 490 of 28 May 2026)."
  ],
  "faq": [
    {
      "q": "When did the Cableway Installations Regulation 2016/424 start to apply?",
      "a": "The regulation was adopted on 9 March 2016, published in the Official Journal on 31 March 2016 and entered into force on 20 April 2016. Articles 22 to 38 on notified bodies and Article 44 on the committee applied from 21 October 2016, Article 45(1) on penalties from 21 March 2018, and the regulation as a whole from 21 April 2018, when Directive 2000/9/EC was repealed. Being a regulation, it applies directly in every Member State without transposition.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 47 and Art. 48"
    },
    {
      "q": "Which installations and products does the regulation cover, and which are excluded?",
      "a": "It applies to new cableway installations designed to transport persons, to modifications of installations that require a new authorisation, and to subsystems and safety components for cableway installations. It does not apply to lifts covered by Directive 2014/33/EU, to installations categorised by Member States as historic, cultural or heritage installations that entered into service before 1 January 1986 and have had no significant changes (including subsystems and safety components specifically designed for them), to installations for agricultural or forestry purposes, to cableways serving mountain shelters and huts that carry only goods and specifically designated persons, to on-site or mobile leisure and amusement equipment not meant to transport persons, to mining and other industrial on-site installations, or to installations in which the users or their carriers are waterborne.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2"
    },
    {
      "q": "Do I need a notified body, and which conformity assessment modules can I use?",
      "a": "Yes. Every route in Article 18 involves a notified body: EU-type examination (Module B, Annex III) combined with either conformity to type based on quality assurance of the production process (Module D, Annex IV) or conformity to type based on subsystem or safety component verification (Module F, Annex V); conformity based on unit verification (Module G, Annex VI); or conformity based on full quality assurance plus design examination (Module H1, Annex VII). The manufacturer chooses the route and a single notified body, an EU-type examination certificate is valid for at most 30 years, and the CE marking is followed by the identification number of the notified body involved in the production control phase.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 18, Art. 21(3) and Annexes III to VII"
    },
    {
      "q": "How long must the technical documentation and records be kept?",
      "a": "Thirty years after the subsystem or safety component was placed on the market. Manufacturers keep the technical documentation and the EU declaration of conformity for 30 years, authorised representatives keep both at the disposal of the authorities for 30 years, importers keep a copy of the declaration for 30 years and ensure the documentation can be produced, and every economic operator must be able to identify its suppliers and the operators and persons responsible for installations it supplied for 30 years after the supply.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(3), Art. 12(2), Art. 13(8) and Art. 16"
    },
    {
      "q": "What happens to installations and components approved under Directive 2000/9/EC?",
      "a": "Member States may not impede the making available of subsystems and safety components that conform to Directive 2000/9/EC and were placed on the market before 21 April 2018, nor the entry into service of installations that conform to the directive and were installed before that date. Certificates and approval decisions issued for safety components under the directive remain valid under the regulation. New products, spare safety components and modifications requiring a new authorisation fall under the regulation.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 2(1), Art. 9(3) and Art. 46"
    },
    {
      "q": "Who authorises a new cableway installation in Denmark, and in which language must the documents be?",
      "a": "The person responsible for the installation under Articles 8 and 9 is the building owner (bygherren), who must apply to Erhvervsstyrelsen for approval before the installation is put into use. The cableway order named Sikkerhedsstyrelsen until executive order nr. 490 of 28 May 2026 replaced the name throughout with effect from 30 May 2026; Sikkerhedsstyrelsen itself became part of Erhvervsstyrelsen in January 2026. The safety report, the EU declaration of conformity, the other conformity documents and the documentation on the characteristics of the installation must be sent no later than the start of construction, and the first three must be in Danish or English. A new application is needed after every significant modification — an extension, a dismantling, a relocation or any other change affecting the construction, the safety characteristics or the safety profile — but not for minor changes that keep the scope and the integrity of the installation so that it still complies with the rules that applied when it was originally built. Instructions and safety information must be in Danish; the EU declaration of conformity, contact details and other required documents may be in Danish or English. Erhvervsstyrelsen also designates the Danish notified bodies, which must be accredited by DANAK.",
      "source": "https://www.retsinformation.dk/eli/lta/2021/2517 · § 5 to § 10; https://www.sik.dk/erhverv/produkter/elevatorer-og-tovbaner/love-og-regler/regler-tovbaner; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 3"
    },
    {
      "q": "What must appear on a subsystem or safety component and its documents?",
      "a": "The CE marking followed by the notified-body number, a type, batch or serial number or other identifier, the manufacturer's name, registered trade name or trade mark and a single postal contact address, and the importer's name and address where the product is imported, all in a language easily understood by users and authorities. Where the size or nature of the product does not allow it, the identifiers and addresses go on the packaging or in an accompanying document. Each product is accompanied by a copy of the EU declaration of conformity, or one copy per batch or consignment delivered to a single operator, and by instructions and safety information in the language the Member State determines.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 11(5) to Art. 11(7), Art. 13(3), Art. 13(4) and Art. 21"
    },
    {
      "q": "What do the emergency procedures added by Regulation (EU) 2024/2748 change?",
      "a": "From 29 May 2026 Chapter Va applies, but only to subsystems and safety components designated as crisis-relevant goods, only while an internal market emergency mode under Regulation (EU) 2024/2747 is active and only after the Commission has adopted the activating implementing act. During such a period notified bodies prioritise applications for those products, a Member State may authorise placing on the market or incorporation of a specific product without the notified-body procedure and without CE marking if compliance with Annex II is demonstrated otherwise, the Commission may list standards or set common specifications that give a presumption of conformity, and market surveillance of the listed products is prioritised with mutual assistance between authorities. In Denmark, a subsystem or safety component covered by an implementing act that extends such an authorisation must carry the information that it is placed on the market as a crisis-relevant good, clearly and in Danish or English (executive order nr. 2517, § 8, stk. 2, inserted by executive order nr. 490 of 28 May 2026).",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · Art. 43a to Art. 43e; https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748 · Art. 2 and Art. 7; https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 4"
    }
  ],
  "changelog": [
    {
      "date": "2026-09-11",
      "kind": "guidance",
      "title": "Guide rewritten from the consolidated text of 29 May 2026",
      "summary": "The body now follows the consolidated text: the regulation also governs the design, construction and entry into service of new installations and the person responsible for them, not only subsystems and safety components; the seven Article 2(2) exclusions are quoted; the five conformity modules, the 30-year record-keeping period, the transitional provisions and the emergency procedures are added; and the Danish enforcement is corrected to Sikkerhedsstyrelsen as the Markedsovervågning department of Erhvervsstyrelsen under executive order nr. 2517 of 14 December 2021 and the product act.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · Art. 1, Art. 2, Art. 8, Art. 11, Art. 18 and Art. 46; https://www.retsinformation.dk/eli/lta/2021/2517 · § 5, § 6 and § 14"
    },
    {
      "date": "2026-05-30",
      "kind": "amendment",
      "title": "Danish cableway order amended: Erhvervsstyrelsen takes over and crisis-relevant goods must be labelled",
      "summary": "Executive order nr. 490 of 28 May 2026 amends executive order nr. 2517 of 14 December 2021: 'Sikkerhedsstyrelsen' becomes 'Erhvervsstyrelsen' throughout, so the building owner now applies to Erhvervsstyrelsen for the entry-into-service approval and Erhvervsstyrelsen designates the Danish notified bodies; the order is re-issued under the product act (lovbekendtgørelse nr. 22 of 8 January 2026, § 8, § 26, stk. 2, § 31, stk. 1 and 2, and § 37, stk. 3 and 4); the footnote now cites Regulation (EU) 2024/2748; and a new § 8, stk. 2, requires a subsystem or safety component covered by an implementing act extending an Article 43c(2) authorisation to carry the 'crisis-relevant good' information clearly, understandably and in Danish or English.",
      "source": "https://www.retsinformation.dk/eli/lta/2026/490 · § 1, nr. 1 to 4, and § 2"
    },
    {
      "date": "2026-05-29",
      "kind": "applies",
      "title": "Emergency procedures for crisis-relevant subsystems and safety components apply",
      "summary": "Chapter Va (Articles 43a to 43e) applies: prioritised notified-body assessment, national authorisations to place designated products on the market without the notified-body procedure and without CE marking, presumption of conformity based on listed standards or common specifications, and prioritised market surveillance with mutual assistance, only for subsystems and safety components designated as crisis-relevant goods while an internal market emergency mode under Regulation (EU) 2024/2747 is active.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748 · Art. 7; https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · Art. 43a to Art. 43e"
    },
    {
      "date": "2024-11-28",
      "kind": "amendment",
      "title": "Regulation (EU) 2024/2748 in force: internal market emergency procedures",
      "summary": "The amending regulation of 9 October 2024, published on 8 November 2024, adds the definitions of crisis-relevant goods and internal market emergency mode to Article 3 and inserts Chapter Va (Articles 43a to 43e); it applies from 29 May 2026. A corrigendum of 22 April 2025 corrected Article 43d(6).",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748 · Art. 2 and Art. 7"
    },
    {
      "date": "2018-04-21",
      "kind": "applies",
      "title": "Regulation (EU) 2016/424 applies in full; Directive 2000/9/EC repealed",
      "summary": "The obligations of economic operators, the conformity assessment procedures, the EU declaration of conformity, the CE marking and the market surveillance procedures apply from 21 April 2018, and Directive 2000/9/EC is repealed with effect from the same date; subsystems, safety components and installations conforming to the directive and placed on the market or installed before that date may still be made available or enter into service, and certificates issued for safety components under the directive remain valid.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 46, Art. 47 and Art. 48(2)"
    },
    {
      "date": "2016-10-21",
      "kind": "applies",
      "title": "Notified-body and committee articles apply",
      "summary": "Articles 22 to 38 on the notification of conformity assessment bodies and Article 44 on the committee procedure apply from 21 October 2016, eighteen months before the rest of the regulation, so that notified bodies were in place by 21 April 2018.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424 · Art. 48(2)(a)"
    },
    {
      "date": "2016-04-20",
      "kind": "in-force",
      "title": "Regulation (EU) 2016/424 enters into force",
      "summary": "Adopted on 9 March 2016 and published in OJ L 81 on 31 March 2016, the regulation entered into force on the twentieth day after publication. A corrigendum published in OJ L 266 of 30 September 2016 corrected the wording of Annex II, point 4.1.2, on cable derailment.",
      "source": "https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32016R0424 · Art. 48(1); https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529 · header and Annex II, point 4.1.2"
    }
  ],
  "sources": [
    {
      "label": "Regulation (EU) 2016/424 on cableway installations, consolidated text of 29 May 2026 (EUR-Lex)",
      "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02016R0424-20260529"
    },
    {
      "label": "Regulation (EU) 2016/424 as published in OJ L 81, 31 March 2016 (EUR-Lex)",
      "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0424"
    },
    {
      "label": "Document information, dates and relationships for CELEX 32016R0424 (EUR-Lex)",
      "url": "https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32016R0424"
    },
    {
      "label": "Regulation (EU) 2024/2748 amending Regulations (EU) No 305/2011, (EU) 2016/424, (EU) 2016/425, (EU) 2016/426, (EU) 2023/988 and (EU) 2023/1230 as regards emergency procedures (EUR-Lex)",
      "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024R2748"
    },
    {
      "label": "Regulation (EU) 2019/1020 on market surveillance and compliance of products, Article 39 and Annex I point 61 (EUR-Lex)",
      "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32019R1020"
    },
    {
      "label": "Cableways (European Commission, DG GROW), with the application guide, harmonised standards and notified bodies",
      "url": "https://single-market-economy.ec.europa.eu/sectors/mechanical-engineering/cableways_en"
    },
    {
      "label": "Bekendtgørelse nr. 2517 af 14. december 2021 om tovbaneanlæg (Retsinformation)",
      "url": "https://www.retsinformation.dk/eli/lta/2021/2517"
    },
    {
      "label": "Bekendtgørelse nr. 490 af 28. maj 2026 om ændring af bekendtgørelse om tovbaneanlæg (Retsinformation)",
      "url": "https://www.retsinformation.dk/eli/lta/2026/490"
    },
    {
      "label": "Regulation (EU) 2016/424 application guide (European Commission, docsroom)",
      "url": "https://ec.europa.eu/docsroom/documents/48154"
    },
    {
      "label": "Bekendtgørelse af lov om produkter og markedsovervågning, LBK nr. 22 af 8. januar 2026 (Retsinformation)",
      "url": "https://www.retsinformation.dk/eli/lta/2026/22"
    },
    {
      "label": "Regler for tovbaner (Sikkerhedsstyrelsen, Erhvervsstyrelsen Markedsovervågning)",
      "url": "https://www.sik.dk/erhverv/produkter/elevatorer-og-tovbaner/love-og-regler/regler-tovbaner"
    },
    {
      "label": "Kontrol med elevatorer og tovbaner (Sikkerhedsstyrelsen, Erhvervsstyrelsen Markedsovervågning)",
      "url": "https://www.sik.dk/erhverv/produkter/elevatorer-og-tovbaner/kontrol-og-tilsyn/kontrol-elevatorer-og-tovbaner"
    },
    {
      "label": "Sikkerhedsstyrelsen skal markedsovervåge produkter på maskinområdet, news of 21 November 2018 on the transfer from Arbejdstilsynet (Sikkerhedsstyrelsen)",
      "url": "https://www.sik.dk/om-os/sik/nyheder/sikkerhedsstyrelsen-skal-markedsovervage-produkter-pa-maskinomradet"
    }
  ],
  "reviewer": {
    "name": "Conphora compliance team",
    "role": "Compliance editors, Conphora"
  },
  "reviewedAt": "2026-09-24",
  "nextReview": "2027-03-11",
  "links": {
    "tools": [],
    "courses": [],
    "related": {
      "en": "/regulations/cir/",
      "dk": "/dk/eu-regulativer/cir/"
    }
  }
}