{ "$schema": "https://www.conphora.com/schemas/regulation-page.json", "code": "ATEX", "locale": "en", "url": "https://www.conphora.com/regulations/atex/", "json": "https://www.conphora.com/regulations/atex.json", "summaryPdf": "https://www.conphora.com/regulations/atex/summary.pdf", "dateModified": "2026-09-11", "regulation": { "code": "ATEX", "name": "Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)", "shortName": "ATEX Directive", "reference": "Directive 2014/34/EU", "celex": "32014L0034", "eurlex": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034", "actType": "Directive", "category": "CE / Product Safety", "inForce": "2014-04-18", "appliesFrom": "2016-04-20", "changing": false, "video": "regulation-atex" }, "answer": "The ATEX Directive requires equipment and protective systems for use in potentially explosive atmospheres, and their components, to meet essential health and safety requirements and carry the CE and explosion-protection markings, binding manufacturers, importers and distributors. It has applied since 20 April 2016; emergency procedures added by Directive (EU) 2024/2749 apply from 30 May 2026.", "description": "ATEX guide: the directive for equipment and protective systems used in potentially explosive atmospheres, equipment groups I and II and categories M1, M2, 1, 2 and 3, the conformity route per category, the Ex marking, key dates and how to comply.", "enforcedBy": "National market surveillance authorities enforce the national laws transposing the directive with the powers of Regulation (EU) 2019/1020, which lists the directive in its Annex I (Article 34 of the directive still cites Regulation (EC) No 765/2008, read as Regulation (EU) 2019/1020 since 16 July 2021); in Denmark, Sikkerhedsstyrelsen (since January 2026 the Markedsovervågning department of Erhvervsstyrelsen) has controlled all products under the directive since 1 December 2018 under executive order nr. 484 of 28 May 2026 on products for use in a potentially explosive atmosphere (in force since 30 May 2026, replacing nr. 811 of 3 June 2022), issued under the Danish product act, whose § 2 lists the directive and whose § 9 makes Erhvervsstyrelsen the control authority. The toolkit is corrective action within a set period, prohibition or restriction of the making available, withdrawal or recall, orders to end formal non-compliance such as a missing CE or Ex marking, declaration or attestation of conformity, and national penalties that must be effective, proportionate and dissuasive and may include criminal penalties for serious infringements; in Denmark fines, and up to two years of imprisonment in aggravating circumstances.", "keyDates": [ { "date": "2014-02-26", "label": "Directive 2014/34/EU adopted by the European Parliament and the Council as a recast of Directive 94/9/EC", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · title and signature block after Art. 45" }, { "date": "2014-04-18", "label": "Entry into force, the twentieth day after publication in OJ L 96 of 29 March 2014", "source": "https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32014L0034 · Art. 44, first paragraph" }, { "date": "2016-04-19", "label": "Deadline for Member States to adopt and publish the laws transposing Article 1, points 2 and 8 to 26 of Article 2, Article 3, Articles 5 to 41 and Annexes III to X", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 42(1)" }, { "date": "2016-04-20", "label": "National measures apply and points 1 and 3 to 7 of Article 2, Article 4 and Annexes I, II, XI and XII apply directly; Directive 94/9/EC repealed; products conforming to the old directive and placed on the market before this date may still be made available or put into service, and certificates issued under it remain valid", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 41, Art. 42(1), Art. 43 and Art. 44, second paragraph" }, { "date": "2024-11-28", "label": "Directive (EU) 2024/2749 in force: internal market emergency procedures inserted as Chapter 5a (Articles 38a to 38e); transposition by 29 May 2026", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024L2749 · Art. 7, Art. 11 and Art. 12" }, { "date": "2026-05-30", "label": "National measures transposing the emergency procedures of Directive (EU) 2024/2749 apply", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024L2749 · Art. 11(2)" }, { "date": "2026-05-30", "label": "Denmark: executive order nr. 484 of 28 May 2026 on products for use in a potentially explosive atmosphere in force, repealing executive order nr. 811 of 3 June 2022 and transposing Directive (EU) 2024/2749", "source": "https://www.retsinformation.dk/eli/lta/2026/484 · §§ 40-49 and § 53" } ], "amendedBy": [ { "reference": "Directive (EU) 2024/2749", "celex": "32024L2749", "date": "2024-11-28", "summary": "The internal market emergency directive of 9 October 2024, published on 8 November 2024, added the definitions of crisis-relevant goods and internal market emergency mode to Article 2 and inserted Chapter 5a (Articles 38a to 38e) on prioritised conformity assessment by notified bodies, a national authorisation route that replaces the notified-body procedures for listed products, the presumption of conformity based on standards and common specifications and prioritised market surveillance for products designated as crisis-relevant goods while an emergency mode under Regulation (EU) 2024/2747 is active; Member States had to transpose by 29 May 2026 and apply the measures from 30 May 2026. A corrigendum published on 17 September 2025 corrected the text of Article 38d(5).", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024L2749 · Art. 7, Art. 11 and Art. 12; https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02014L0034-20260530 · Art. 2, points (27) and (28), and Art. 38a to Art. 38e" } ], "scope": { "appliesTo": [ "Equipment intended for use in potentially explosive atmospheres: machines, apparatus, fixed or mobile devices, control components and instrumentation and detection or prevention systems which, separately or jointly, are intended for the generation, transfer, storage, measurement, control and conversion of energy or the processing of material and are capable of causing an explosion through their own potential sources of ignition", "Protective systems: devices other than components of equipment which are intended to halt incipient explosions immediately or to limit the effective range of an explosion and are made available separately as autonomous systems", "Safety devices, controlling devices and regulating devices intended for use outside potentially explosive atmospheres but required for or contributing to the safe functioning of equipment and protective systems with respect to the risks of explosion", "Components intended to be incorporated into such equipment and protective systems, meaning items essential to their safe functioning but with no autonomous function", "Both equipment-group I (underground parts of mines and surface installations of mines endangered by firedamp or combustible dust, categories M1 and M2) and equipment-group II (all other places liable to be endangered by explosive atmospheres of gases, vapours, mists or dusts, categories 1, 2 and 3)", "Products made available or put into service on the Union market, including products a manufacturer uses for its own purposes, and the economic operators in the chain: manufacturers, authorised representatives, importers and distributors" ], "derived": [ "Means of transport are excluded, but vehicles intended for use in a potentially explosive atmosphere are not excluded from the directive (Art. 1(2)(f))", "The personal protective equipment exclusion cites Council Directive 89/686/EEC, which Regulation (EU) 2016/425 repealed with effect from 21 April 2018; the reference is read as a reference to that regulation (Art. 1(2)(d); Regulation (EU) 2016/425, Art. 46)", "Products that conform to harmonised standards, or parts of them, whose references are published in the Official Journal are presumed to conform to the Annex II essential health and safety requirements those standards cover (Art. 12(1))", "Components follow the same conformity assessment procedures as equipment but receive no CE marking and no EU declaration of conformity; the manufacturer issues a written attestation of conformity instead (Art. 13(3))", "An importer or distributor that places a product on the market under its own name or trade mark, or modifies a product already placed on the market in a way that may affect compliance, is treated as the manufacturer (Art. 10)", "Where a product is also subject to other Union acts requiring an EU declaration of conformity, a single declaration covering all of them is drawn up (Art. 14(3))", "Since 16 July 2021 a product under the directive may be placed on the market only if a manufacturer, importer, authorised representative or fulfilment service provider established in the Union is responsible for the compliance tasks of Article 4 of Regulation (EU) 2019/1020, which lists the directive in its Annex I (Regulation (EU) 2019/1020, Art. 4(1), (2) and (5) and Annex I, point 53)", "The separate workplace Directive 1999/92/EC complements the responsibilities of manufacturers under Directive 2014/34/EU by setting out the responsibilities of employers, and the ATEX Directive leaves Member States free to lay down requirements for protecting workers who use the products as long as the products themselves are not modified (Art. 3(2); European Commission ATEX page)" ], "categories": [ { "id": "group-ii-equipment", "label": "Equipment for places other than mines with explosive gas, vapour, mist or dust atmospheres (equipment-group II, categories 1, 2 or 3: motors, pumps, fans, lighting, switchgear, sensors, instrumentation, detection systems)" }, { "id": "group-i-mining-equipment", "label": "Equipment for underground parts of mines and surface installations of mines endangered by firedamp or combustible dust (equipment-group I, categories M1 or M2)" }, { "id": "protective-systems", "label": "Protective systems made available separately as autonomous systems to halt incipient explosions or limit their effective range" }, { "id": "safety-control-devices", "label": "Safety, controlling or regulating devices used outside the explosive atmosphere but required for the safe functioning of ATEX equipment or protective systems" }, { "id": "components", "label": "Components with no autonomous function intended to be incorporated into ATEX equipment or protective systems" }, { "id": "non-atex-equipment", "label": "Equipment not intended for use in a potentially explosive atmosphere (ordinary electrical or mechanical equipment)" }, { "id": "medical-devices", "label": "Medical devices intended for use in a medical environment" }, { "id": "explosive-substances-equipment", "label": "Equipment or protective systems where the explosion hazard results exclusively from explosive substances or unstable chemical substances" }, { "id": "domestic-fuel-gas-equipment", "label": "Equipment for domestic and non-commercial environments where an explosive atmosphere may only rarely be created, solely by accidental leakage of fuel gas" }, { "id": "personal-protective-equipment", "label": "Personal protective equipment" }, { "id": "ships-offshore-units", "label": "Seagoing vessels and mobile offshore units together with the equipment on board" }, { "id": "means-of-transport", "label": "Vehicles, trailers and other means of transport for passengers or goods by air, road, rail or water, other than vehicles intended for use in a potentially explosive atmosphere" }, { "id": "military-equipment", "label": "Equipment covered by point (b) of Article 346(1) of the Treaty on the Functioning of the European Union" } ], "roles": [ { "id": "manufacturer", "label": "Manufacturer (including brand owners and own-use manufacturers)", "definition": "Any natural or legal person who manufactures a product or has a product designed or manufactured, and markets that product under his name or trade mark or uses it for his own purposes; an importer or distributor that sells under its own name or trade mark or modifies a product in a way that may affect compliance is treated as the manufacturer.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 2, point (12), and Art. 10" }, { "id": "other", "label": "Authorised representative", "definition": "Any natural or legal person established within the Union who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks; the mandate cannot cover the duty to design and manufacture to the essential health and safety requirements or to draw up the technical documentation.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 2, point (13), and Art. 7(1)" }, { "id": "importer", "label": "Importer", "definition": "Any natural or legal person established within the Union who places a product from a third country on the Union market.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 2, point (14)" }, { "id": "distributor", "label": "Distributor (wholesaler or retailer)", "definition": "Any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a product available on the market.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 2, point (15)" } ], "rules": [ { "categories": [ "non-atex-equipment" ], "roles": [ "*" ], "size": "any", "result": "out-of-scope", "note": "The directive covers only equipment and protective systems intended for use in potentially explosive atmospheres, the safety, controlling and regulating devices outside such atmospheres needed for their safe functioning, and their components; the intended use is what the manufacturer prescribes by assigning an equipment-group and category. Ordinary equipment falls outside it, although other Union legislation such as the Low Voltage Directive 2014/35/EU may apply instead.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 1(1) and Art. 2, points (1) and (9)" }, { "categories": [ "medical-devices", "explosive-substances-equipment", "domestic-fuel-gas-equipment", "personal-protective-equipment", "ships-offshore-units", "means-of-transport", "military-equipment" ], "roles": [ "*" ], "size": "any", "result": "out-of-scope", "note": "Article 1(2) excludes medical devices intended for use in a medical environment, equipment and protective systems where the explosion hazard results exclusively from explosive or unstable chemical substances, equipment for domestic and non-commercial use where an explosive atmosphere arises only rarely from accidental fuel gas leakage, personal protective equipment (the article cites Directive 89/686/EEC, read as Regulation (EU) 2016/425 since 21 April 2018), seagoing vessels and mobile offshore units with their on-board equipment, means of transport other than vehicles intended for use in a potentially explosive atmosphere, and equipment covered by Article 346(1)(b) TFEU.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 1(2); https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0425 · Art. 46" }, { "categories": [ "group-ii-equipment", "group-i-mining-equipment", "protective-systems", "safety-control-devices" ], "roles": [ "manufacturer", "importer", "distributor", "other" ], "size": "any", "result": "in-scope", "note": "Equipment, protective systems and the safety, controlling and regulating devices listed in Article 1(1) may be made available on the market and put into service only if, properly installed, maintained and used as intended, they comply with the directive; the obligations fall on the manufacturer, authorised representative, importer and distributor and contain no company-size threshold.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 1(1), Art. 3(1), Art. 2, point (16), and Art. 6 to Art. 9" }, { "categories": [ "components" ], "roles": [ "manufacturer", "importer", "distributor", "other" ], "size": "any", "result": "in-scope", "note": "Components intended to be incorporated into ATEX equipment or protective systems are within the directive and follow the same conformity assessment procedures, except that they receive no CE marking and no EU declaration of conformity; the manufacturer issues a written attestation of conformity stating their characteristics and how they must be incorporated, and the operator duties on documents, markings and corrective action apply to them.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 1(1)(c), Art. 6(2) and Art. 13(3)" }, { "categories": [ "*" ], "roles": [ "*" ], "size": "any", "result": "depends", "note": "Whether the directive applies turns on whether the product is intended for use in a potentially explosive atmosphere or is needed for the safe functioning of such a product, whether an Article 1(2) exclusion applies, and which role the operator holds.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 1 and Art. 2, point (9)" } ] }, "obligations": { "manufacturer": [ { "text": "Design and manufacture the product in accordance with the Annex II essential health and safety requirements that apply to it, taking account of its intended use: integrated explosion safety (prevent explosive atmospheres, prevent ignition from every electrical and non-electrical source, and halt or limit an explosion that occurs), analysis of possible operating faults and foreseeable misuse, material selection, potential ignition sources, external effects and the supplementary requirements for its group and category. The duty applies equally to products you use for your own purposes.", "id": "atex-mfr-design-manufacture-product", "kind": "evidence", "level": "product", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 4, Art. 6(1) and Annex II, points 1.0.1 to 1.0.4 and 2" }, { "text": "Assign the product to its equipment-group and category per Annex I and follow the Article 13 procedure for it: for categories M1 and 1, EU-type examination (Annex III) plus conformity to type based on quality assurance of the production process (Annex IV) or product verification (Annex V); for categories M2 and 2, EU-type examination plus internal production control with supervised product testing (Annex VI) or product quality assurance (Annex VII) for internal combustion engines and electrical equipment, and internal production control (Annex VIII) with the technical documentation communicated to a notified body for other equipment; for Group II category 3, internal production control (Annex VIII); unit verification (Annex IX) may be used for any group; protective systems follow the category M1 and 1 routes or unit verification.", "id": "atex-mfr-assign-product-equipment-group", "kind": "decision", "level": "product", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 2, points (8) and (9), Art. 13(1) and (2) and Annex I" }, { "text": "Draw up the technical documentation referred to in Annexes III to IX before placing the product on the market, including an adequate analysis and assessment of the risks, a general description, design and manufacturing drawings and schemes, the explanations needed to understand them, the harmonised standards applied in full or in part or the solutions adopted instead, design calculations and examinations, and test reports; documents and correspondence for the procedures are drawn up in the language the Member State determines, in Denmark Danish or English.", "id": "atex-mfr-draw-technical-documentation", "kind": "evidence", "level": "product", "timing": "before-market", "sharedKey": "technical-documentation", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(2), Art. 13(6) and Annex VIII, point 2; https://www.retsinformation.dk/eli/lta/2026/484 · § 31" }, { "text": "Draw up the EU declaration of conformity following the Annex X model for each product other than a component, translated into the languages the Member State requires, continuously updated and, where several Union acts apply, as a single declaration covering them all; for a component, draw up a written attestation of conformity stating its characteristics and how it must be incorporated. A copy of the declaration or attestation accompanies each product, or a single copy per batch or consignment delivered to a single user.", "id": "atex-mfr-draw-declaration-conformity", "kind": "evidence", "level": "product-market", "timing": "before-market", "sharedKey": "declaration-of-conformity", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(2), Art. 13(3) and Art. 14" }, { "text": "Keep the technical documentation and the EU declaration of conformity or attestation of conformity for 10 years after the product was placed on the market, keep series production in conformity taking account of changes in design, characteristics and the standards or technical specifications referenced, and where the risks warrant it sample-test marketed products, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors.", "id": "atex-mfr-keep-technical-documentation", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(3) and Art. 6(4)" }, { "text": "Keep the technical documentation and the EU declaration of conformity or attestation of conformity for 10 years after the product was placed on the market.", "id": "atex-mfr-keep-documentation-10-years", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(3)" }, { "text": "Keep series production of the product in conformity, taking account of changes in its design or characteristics and in the harmonised standards or technical specifications by reference to which conformity is declared.", "id": "atex-mfr-keep-series-conformity", "kind": "standing", "level": "product", "timing": "ongoing", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(4)" }, { "text": "Where the risks presented by a product warrant it, sample-test products made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.", "id": "atex-mfr-sample-test-complaints", "kind": "procedure", "level": "company", "timing": "ongoing", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(4)" }, { "text": "Mark the product with a type, batch or serial number or other identifier, your name, registered trade name or trade mark and a single postal contact address, and, on products other than components, the CE marking followed by the identification number of the notified body where it is involved in the production control phase, the specific marking of explosion protection, the symbols of the equipment-group and category, for Group II the letter G for gas, vapour or mist atmospheres and/or D for dust atmospheres, the designation of series or type, the year of construction and any other information essential to safe use; products designed for a particular explosive atmosphere are marked accordingly.", "id": "atex-mfr-mark-product-type", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "identification-and-address", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(5) to Art. 6(7), Art. 16 and Annex II, point 1.0.5" }, { "text": "Mark the product with a type, batch or serial number or other identifier and with your name, registered trade name or trade mark and a single postal contact address, in a language end users and authorities understand.", "id": "atex-mfr-mark-type-name-address", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "identification-and-address", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(5) and Art. 6(7)" }, { "text": "On products other than components, affix the CE marking, followed by the identification number of the notified body where it is involved in the production control phase.", "id": "atex-mfr-affix-ce-marking", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "ce-marking", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 16" }, { "text": "On products other than components, affix the specific marking of explosion protection, the equipment-group and category symbols, for Group II the letter G (gas, vapour or mist) and/or D (dust), the designation of series or type, the year of construction and any other information essential to safe use; mark products designed for a particular explosive atmosphere accordingly.", "id": "atex-mfr-mark-explosion-protection", "kind": "mark", "level": "product", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(6) and Annex II, point 1.0.5" }, { "text": "Supply clear, understandable instructions and safety information in the language the Member State determines, containing at least the marked information (except the batch or serial number), instructions for safe putting into service, use, assembly and dismantling, maintenance, installation and adjustment, the details that allow a decision beyond doubt whether the product can be used safely in the intended area, the electrical and pressure parameters, maximum surface temperatures and other limit values, any special conditions of use and the drawings and diagrams needed.", "id": "atex-mfr-supply-clear-understandable", "kind": "evidence", "level": "product-market", "timing": "before-market", "sharedKey": "instructions-and-safety-information", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(8) and Annex II, point 1.0.6" }, { "text": "If you consider or have reason to believe that a product you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States where you made it available; on a reasoned request provide all information and documentation demonstrating conformity in a language the authority understands, cooperate on risk-elimination measures, and be able to identify your suppliers and customers for 10 years.", "id": "atex-mfr-immediately-bring-conformity", "kind": "submission", "level": "product", "timing": "on-event", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(9), Art. 6(10) and Art. 11" }, { "text": "If you consider or have reason to believe that a product you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States where you made it available, with details of the non-compliance and the measures taken.", "id": "atex-mfr-correct-withdraw-recall", "kind": "submission", "level": "product", "timing": "on-event", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(9)" }, { "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks posed by products you placed on the market.", "id": "atex-mfr-provide-information-request", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(10)" }, { "text": "Be able to identify to the market surveillance authorities, for 10 years after the supply, every economic operator that supplied you with a product and every economic operator you supplied with one.", "id": "atex-mfr-identify-supply-chain", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 11" } ], "other": [ { "text": "Act under a written mandate that at least lets you keep the EU declaration of conformity or attestation of conformity and the technical documentation at the disposal of the national market surveillance authorities for 10 years after the product was placed on the market, provide conformity information and documentation on reasoned request, and cooperate with the authorities on risk-elimination measures for the products covered by the mandate.", "id": "atex-oth-act-written-mandate", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 7(2)" }, { "text": "Act as authorised representative only under a written mandate from the manufacturer that sets out the tasks you perform.", "id": "atex-oth-hold-written-mandate", "kind": "evidence", "level": "company", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 7(1) and Art. 7(2)" }, { "text": "Keep the EU declaration of conformity or attestation of conformity and the technical documentation at the disposal of the national market surveillance authorities for 10 years after the product was placed on the market.", "id": "atex-oth-keep-documentation-10-years", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 7(2)(a)" }, { "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, and cooperate with the authorities on any action to eliminate the risks posed by the products covered by your mandate.", "id": "atex-oth-provide-information-request", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 7(2)(b) and (c)" }, { "text": "Do not take over the manufacturer's duty to design and manufacture to the essential health and safety requirements or to draw up the technical documentation; those cannot form part of the mandate, although under the conformity assessment modules the mandate may cover affixing the CE marking and drawing up the declaration or attestation on the manufacturer's behalf and under its responsibility.", "id": "atex-oth-take-manufacturers-duty", "kind": "status", "level": "company", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 7(1) and Annex VIII, point 5" }, { "text": "Be able to identify the economic operators that supplied you and that you supplied for 10 years.", "id": "atex-oth-able-identify-economic", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 11" } ], "importer": [ { "text": "Place only compliant products on the market, and before doing so check that the manufacturer carried out the Article 13 conformity assessment procedure, drew up the technical documentation, affixed the CE marking where applicable, supplied the EU declaration of conformity or attestation of conformity and the required documents, and applied the identification, explosion-protection and address markings; hold a product you believe does not meet the Annex II requirements back until it conforms, and inform the manufacturer and the authorities where it presents a risk.", "id": "atex-imp-place-compliant-products", "kind": "verification", "level": "product", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(1) and Art. 8(2)" }, { "text": "Indicate your name, registered trade name or trade mark and a postal contact address on the product or, where not possible, on its packaging or in an accompanying document, in a language end users and authorities understand.", "id": "atex-imp-indicate-name-registered", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "identification-and-address", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(3)" }, { "text": "Ensure the product is accompanied by instructions and safety information in the language the Member State determines.", "id": "atex-imp-ensure-product-accompanied", "kind": "verification", "level": "product-market", "timing": "before-market", "sharedKey": "instructions-and-safety-information", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(4)" }, { "text": "Keep storage and transport conditions from jeopardising compliance with the Annex II requirements, and where the risks warrant it sample-test, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors.", "id": "atex-imp-keep-storage-transport", "kind": "standing", "level": "company", "timing": "ongoing", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(5) and Art. 8(6)" }, { "text": "While a product is under your responsibility, keep its storage and transport conditions from jeopardising its compliance with the essential requirements.", "id": "atex-imp-keep-storage-conditions", "kind": "standing", "level": "company", "timing": "ongoing", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(5)" }, { "text": "Where the risks presented by a product warrant it, sample-test products made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.", "id": "atex-imp-sample-test-complaints", "kind": "procedure", "level": "company", "timing": "ongoing", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(6)" }, { "text": "If a product you placed on the market does not conform, immediately take corrective measures, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States concerned with details of the non-compliance and the corrective measures.", "id": "atex-imp-immediately-take-corrective", "kind": "submission", "level": "product", "timing": "on-event", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(7)" }, { "text": "Keep a copy of the EU declaration of conformity or attestation of conformity at the disposal of the market surveillance authorities for 10 years and ensure the technical documentation can be made available on request; provide conformity information on reasoned request in a language the authority understands, cooperate on risk-elimination measures, and identify suppliers and customers for 10 years.", "id": "atex-imp-keep-copy-declaration", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(8), Art. 8(9) and Art. 11" }, { "text": "Keep a copy of the EU declaration of conformity or attestation of conformity at the disposal of the market surveillance authorities for 10 years after the product was placed on the market, and ensure the technical documentation can be made available to them on request.", "id": "atex-imp-keep-declaration-copy", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(8)" }, { "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks posed by products you placed on the market.", "id": "atex-imp-provide-information-request", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 8(9)" }, { "text": "Be able to identify to the market surveillance authorities, for 10 years after the supply, every economic operator that supplied you with a product and every economic operator you supplied with one.", "id": "atex-imp-identify-supply-chain", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 11" }, { "text": "If you place a product on the market under your own name or trade mark, or modify a product already placed on the market in a way that may affect compliance, you carry the manufacturer's obligations under Article 6.", "id": "atex-imp-modify-product-already", "kind": "status", "level": "product", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 10" } ], "distributor": [ { "text": "Act with due care and, before making a product available, verify that it bears the CE marking where applicable, is accompanied by the EU declaration of conformity or attestation of conformity, the required documents and instructions and safety information in the language of the Member State where it is sold, and that the manufacturer and importer have applied their identification, explosion-protection and address markings; hold a product you believe does not meet the Annex II requirements back, and inform the manufacturer or importer and the authorities where it presents a risk.", "id": "atex-dist-act-due-care", "kind": "verification", "level": "product-market", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 9(1) and Art. 9(2)" }, { "text": "Keep storage and transport conditions from jeopardising compliance with the Annex II essential health and safety requirements.", "id": "atex-dist-keep-storage-transport", "kind": "standing", "level": "company", "timing": "ongoing", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 9(3)" }, { "text": "If a product you made available does not conform, make sure corrective measures are taken to bring it into conformity, withdraw or recall it, and where it presents a risk immediately inform the competent authorities of the Member States concerned.", "id": "atex-dist-make-sure-corrective", "kind": "submission", "level": "product", "timing": "on-event", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 9(4)" }, { "text": "On reasoned request, provide the information and documentation demonstrating conformity, cooperate on risk-elimination measures, and identify suppliers and customers for 10 years.", "id": "atex-dist-provide-information-documentation", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "retired": "2026-09-24", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 9(5) and Art. 11" }, { "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks posed by products you made available.", "id": "atex-dist-provide-information-request", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 9(5)" }, { "text": "Be able to identify to the market surveillance authorities, for 10 years after the supply, every economic operator that supplied you with a product and every economic operator you supplied with one.", "id": "atex-dist-identify-supply-chain", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 11" }, { "text": "If you sell under your own name or trade mark or modify a product in a way that may affect compliance, you take on the manufacturer's obligations.", "id": "atex-dist-take-manufacturers-obligations", "kind": "status", "level": "product", "timing": "before-market", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 10" } ] }, "requirements": [ { "id": "atex-mfr-design-manufacture-product", "role": "manufacturer", "kind": "evidence", "level": "product", "timing": "before-market", "text": "Design and manufacture the product in accordance with the Annex II essential health and safety requirements that apply to it, taking account of its intended use: integrated explosion safety (prevent explosive atmospheres, prevent ignition from every electrical and non-electrical source, and halt or limit an explosion that occurs), analysis of possible operating faults and foreseeable misuse, material selection, potential ignition sources, external effects and the supplementary requirements for its group and category. The duty applies equally to products you use for your own purposes.", "article": "Art. 4, Art. 6(1) and Annex II, points 1.0.1 to 1.0.4 and 2", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-assign-product-equipment-group", "role": "manufacturer", "kind": "decision", "level": "product", "timing": "before-market", "text": "Assign the product to its equipment-group and category per Annex I and follow the Article 13 procedure for it: for categories M1 and 1, EU-type examination (Annex III) plus conformity to type based on quality assurance of the production process (Annex IV) or product verification (Annex V); for categories M2 and 2, EU-type examination plus internal production control with supervised product testing (Annex VI) or product quality assurance (Annex VII) for internal combustion engines and electrical equipment, and internal production control (Annex VIII) with the technical documentation communicated to a notified body for other equipment; for Group II category 3, internal production control (Annex VIII); unit verification (Annex IX) may be used for any group; protective systems follow the category M1 and 1 routes or unit verification.", "article": "Art. 2, points (8) and (9), Art. 13(1) and (2) and Annex I", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-draw-technical-documentation", "role": "manufacturer", "kind": "evidence", "level": "product", "timing": "before-market", "sharedKey": "technical-documentation", "text": "Draw up the technical documentation referred to in Annexes III to IX before placing the product on the market, including an adequate analysis and assessment of the risks, a general description, design and manufacturing drawings and schemes, the explanations needed to understand them, the harmonised standards applied in full or in part or the solutions adopted instead, design calculations and examinations, and test reports; documents and correspondence for the procedures are drawn up in the language the Member State determines, in Denmark Danish or English.", "article": "Art. 6(2), Art. 13(6) and Annex VIII, point 2; https://www.retsinformation.dk/eli/lta/2026/484 · § 31", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-draw-declaration-conformity", "role": "manufacturer", "kind": "evidence", "level": "product-market", "timing": "before-market", "sharedKey": "declaration-of-conformity", "text": "Draw up the EU declaration of conformity following the Annex X model for each product other than a component, translated into the languages the Member State requires, continuously updated and, where several Union acts apply, as a single declaration covering them all; for a component, draw up a written attestation of conformity stating its characteristics and how it must be incorporated. A copy of the declaration or attestation accompanies each product, or a single copy per batch or consignment delivered to a single user.", "article": "Art. 6(2), Art. 13(3) and Art. 14", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-keep-technical-documentation", "role": "manufacturer", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "retired": "2026-09-24", "text": "Keep the technical documentation and the EU declaration of conformity or attestation of conformity for 10 years after the product was placed on the market, keep series production in conformity taking account of changes in design, characteristics and the standards or technical specifications referenced, and where the risks warrant it sample-test marketed products, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors.", "article": "Art. 6(3) and Art. 6(4)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-keep-documentation-10-years", "role": "manufacturer", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Keep the technical documentation and the EU declaration of conformity or attestation of conformity for 10 years after the product was placed on the market.", "article": "Art. 6(3)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-keep-series-conformity", "role": "manufacturer", "kind": "standing", "level": "product", "timing": "ongoing", "text": "Keep series production of the product in conformity, taking account of changes in its design or characteristics and in the harmonised standards or technical specifications by reference to which conformity is declared.", "article": "Art. 6(4)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-sample-test-complaints", "role": "manufacturer", "kind": "procedure", "level": "company", "timing": "ongoing", "text": "Where the risks presented by a product warrant it, sample-test products made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.", "article": "Art. 6(4)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-mark-product-type", "role": "manufacturer", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "identification-and-address", "retired": "2026-09-24", "text": "Mark the product with a type, batch or serial number or other identifier, your name, registered trade name or trade mark and a single postal contact address, and, on products other than components, the CE marking followed by the identification number of the notified body where it is involved in the production control phase, the specific marking of explosion protection, the symbols of the equipment-group and category, for Group II the letter G for gas, vapour or mist atmospheres and/or D for dust atmospheres, the designation of series or type, the year of construction and any other information essential to safe use; products designed for a particular explosive atmosphere are marked accordingly.", "article": "Art. 6(5) to Art. 6(7), Art. 16 and Annex II, point 1.0.5", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-mark-type-name-address", "role": "manufacturer", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "identification-and-address", "text": "Mark the product with a type, batch or serial number or other identifier and with your name, registered trade name or trade mark and a single postal contact address, in a language end users and authorities understand.", "article": "Art. 6(5) and Art. 6(7)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-affix-ce-marking", "role": "manufacturer", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "ce-marking", "text": "On products other than components, affix the CE marking, followed by the identification number of the notified body where it is involved in the production control phase.", "article": "Art. 16", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-mark-explosion-protection", "role": "manufacturer", "kind": "mark", "level": "product", "timing": "before-market", "text": "On products other than components, affix the specific marking of explosion protection, the equipment-group and category symbols, for Group II the letter G (gas, vapour or mist) and/or D (dust), the designation of series or type, the year of construction and any other information essential to safe use; mark products designed for a particular explosive atmosphere accordingly.", "article": "Art. 6(6) and Annex II, point 1.0.5", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-supply-clear-understandable", "role": "manufacturer", "kind": "evidence", "level": "product-market", "timing": "before-market", "sharedKey": "instructions-and-safety-information", "text": "Supply clear, understandable instructions and safety information in the language the Member State determines, containing at least the marked information (except the batch or serial number), instructions for safe putting into service, use, assembly and dismantling, maintenance, installation and adjustment, the details that allow a decision beyond doubt whether the product can be used safely in the intended area, the electrical and pressure parameters, maximum surface temperatures and other limit values, any special conditions of use and the drawings and diagrams needed.", "article": "Art. 6(8) and Annex II, point 1.0.6", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-immediately-bring-conformity", "role": "manufacturer", "kind": "submission", "level": "product", "timing": "on-event", "retired": "2026-09-24", "text": "If you consider or have reason to believe that a product you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States where you made it available; on a reasoned request provide all information and documentation demonstrating conformity in a language the authority understands, cooperate on risk-elimination measures, and be able to identify your suppliers and customers for 10 years.", "article": "Art. 6(9), Art. 6(10) and Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-correct-withdraw-recall", "role": "manufacturer", "kind": "submission", "level": "product", "timing": "on-event", "text": "If you consider or have reason to believe that a product you placed on the market does not conform, immediately bring it into conformity, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States where you made it available, with details of the non-compliance and the measures taken.", "article": "Art. 6(9)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-provide-information-request", "role": "manufacturer", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks posed by products you placed on the market.", "article": "Art. 6(10)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-mfr-identify-supply-chain", "role": "manufacturer", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Be able to identify to the market surveillance authorities, for 10 years after the supply, every economic operator that supplied you with a product and every economic operator you supplied with one.", "article": "Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-oth-act-written-mandate", "role": "other", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "retired": "2026-09-24", "text": "Act under a written mandate that at least lets you keep the EU declaration of conformity or attestation of conformity and the technical documentation at the disposal of the national market surveillance authorities for 10 years after the product was placed on the market, provide conformity information and documentation on reasoned request, and cooperate with the authorities on risk-elimination measures for the products covered by the mandate.", "article": "Art. 7(2)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-oth-hold-written-mandate", "role": "other", "kind": "evidence", "level": "company", "timing": "before-market", "text": "Act as authorised representative only under a written mandate from the manufacturer that sets out the tasks you perform.", "article": "Art. 7(1) and Art. 7(2)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-oth-keep-documentation-10-years", "role": "other", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Keep the EU declaration of conformity or attestation of conformity and the technical documentation at the disposal of the national market surveillance authorities for 10 years after the product was placed on the market.", "article": "Art. 7(2)(a)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-oth-provide-information-request", "role": "other", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, and cooperate with the authorities on any action to eliminate the risks posed by the products covered by your mandate.", "article": "Art. 7(2)(b) and (c)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-oth-take-manufacturers-duty", "role": "other", "kind": "status", "level": "company", "timing": "before-market", "text": "Do not take over the manufacturer's duty to design and manufacture to the essential health and safety requirements or to draw up the technical documentation; those cannot form part of the mandate, although under the conformity assessment modules the mandate may cover affixing the CE marking and drawing up the declaration or attestation on the manufacturer's behalf and under its responsibility.", "article": "Art. 7(1) and Annex VIII, point 5", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-oth-able-identify-economic", "role": "other", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Be able to identify the economic operators that supplied you and that you supplied for 10 years.", "article": "Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-place-compliant-products", "role": "importer", "kind": "verification", "level": "product", "timing": "before-market", "text": "Place only compliant products on the market, and before doing so check that the manufacturer carried out the Article 13 conformity assessment procedure, drew up the technical documentation, affixed the CE marking where applicable, supplied the EU declaration of conformity or attestation of conformity and the required documents, and applied the identification, explosion-protection and address markings; hold a product you believe does not meet the Annex II requirements back until it conforms, and inform the manufacturer and the authorities where it presents a risk.", "article": "Art. 8(1) and Art. 8(2)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-indicate-name-registered", "role": "importer", "kind": "mark", "level": "product", "timing": "before-market", "sharedKey": "identification-and-address", "text": "Indicate your name, registered trade name or trade mark and a postal contact address on the product or, where not possible, on its packaging or in an accompanying document, in a language end users and authorities understand.", "article": "Art. 8(3)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-ensure-product-accompanied", "role": "importer", "kind": "verification", "level": "product-market", "timing": "before-market", "sharedKey": "instructions-and-safety-information", "text": "Ensure the product is accompanied by instructions and safety information in the language the Member State determines.", "article": "Art. 8(4)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-keep-storage-transport", "role": "importer", "kind": "standing", "level": "company", "timing": "ongoing", "retired": "2026-09-24", "text": "Keep storage and transport conditions from jeopardising compliance with the Annex II requirements, and where the risks warrant it sample-test, investigate complaints and keep a register of complaints, non-conforming products and recalls, informing distributors.", "article": "Art. 8(5) and Art. 8(6)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-keep-storage-conditions", "role": "importer", "kind": "standing", "level": "company", "timing": "ongoing", "text": "While a product is under your responsibility, keep its storage and transport conditions from jeopardising its compliance with the essential requirements.", "article": "Art. 8(5)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-sample-test-complaints", "role": "importer", "kind": "procedure", "level": "company", "timing": "ongoing", "text": "Where the risks presented by a product warrant it, sample-test products made available on the market, investigate complaints and keep a register of complaints, non-conforming products and recalls, and keep distributors informed of that monitoring.", "article": "Art. 8(6)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-immediately-take-corrective", "role": "importer", "kind": "submission", "level": "product", "timing": "on-event", "text": "If a product you placed on the market does not conform, immediately take corrective measures, withdraw or recall it, and where it presents a risk inform the competent authorities of the Member States concerned with details of the non-compliance and the corrective measures.", "article": "Art. 8(7)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-keep-copy-declaration", "role": "importer", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "retired": "2026-09-24", "text": "Keep a copy of the EU declaration of conformity or attestation of conformity at the disposal of the market surveillance authorities for 10 years and ensure the technical documentation can be made available on request; provide conformity information on reasoned request in a language the authority understands, cooperate on risk-elimination measures, and identify suppliers and customers for 10 years.", "article": "Art. 8(8), Art. 8(9) and Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-keep-declaration-copy", "role": "importer", "kind": "standing", "level": "product", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Keep a copy of the EU declaration of conformity or attestation of conformity at the disposal of the market surveillance authorities for 10 years after the product was placed on the market, and ensure the technical documentation can be made available to them on request.", "article": "Art. 8(8)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-provide-information-request", "role": "importer", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks posed by products you placed on the market.", "article": "Art. 8(9)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-identify-supply-chain", "role": "importer", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Be able to identify to the market surveillance authorities, for 10 years after the supply, every economic operator that supplied you with a product and every economic operator you supplied with one.", "article": "Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-imp-modify-product-already", "role": "importer", "kind": "status", "level": "product", "timing": "before-market", "text": "If you place a product on the market under your own name or trade mark, or modify a product already placed on the market in a way that may affect compliance, you carry the manufacturer's obligations under Article 6.", "article": "Art. 10", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-act-due-care", "role": "distributor", "kind": "verification", "level": "product-market", "timing": "before-market", "text": "Act with due care and, before making a product available, verify that it bears the CE marking where applicable, is accompanied by the EU declaration of conformity or attestation of conformity, the required documents and instructions and safety information in the language of the Member State where it is sold, and that the manufacturer and importer have applied their identification, explosion-protection and address markings; hold a product you believe does not meet the Annex II requirements back, and inform the manufacturer or importer and the authorities where it presents a risk.", "article": "Art. 9(1) and Art. 9(2)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-keep-storage-transport", "role": "distributor", "kind": "standing", "level": "company", "timing": "ongoing", "text": "Keep storage and transport conditions from jeopardising compliance with the Annex II essential health and safety requirements.", "article": "Art. 9(3)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-make-sure-corrective", "role": "distributor", "kind": "submission", "level": "product", "timing": "on-event", "text": "If a product you made available does not conform, make sure corrective measures are taken to bring it into conformity, withdraw or recall it, and where it presents a risk immediately inform the competent authorities of the Member States concerned.", "article": "Art. 9(4)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-provide-information-documentation", "role": "distributor", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "retired": "2026-09-24", "text": "On reasoned request, provide the information and documentation demonstrating conformity, cooperate on risk-elimination measures, and identify suppliers and customers for 10 years.", "article": "Art. 9(5) and Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-provide-information-request", "role": "distributor", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "authority-cooperation", "text": "On a reasoned request from a competent national authority, provide all the information and documentation needed to demonstrate the conformity of the product, in a language that authority can easily understand, and cooperate with it on any action to eliminate the risks posed by products you made available.", "article": "Art. 9(5)", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-identify-supply-chain", "role": "distributor", "kind": "standing", "level": "company", "timing": "ongoing", "sharedKey": "record-keeping-10y", "text": "Be able to identify to the market surveillance authorities, for 10 years after the supply, every economic operator that supplied you with a product and every economic operator you supplied with one.", "article": "Art. 11", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "id": "atex-dist-take-manufacturers-obligations", "role": "distributor", "kind": "status", "level": "product", "timing": "before-market", "text": "If you sell under your own name or trade mark or modify a product in a way that may affect compliance, you take on the manufacturer's obligations.", "article": "Art. 10", "sourceUrl": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" } ], "requirementsHash": "e88d9c68c43d0f70", "penalties": { "text": "Member States lay down the rules on penalties for infringements of their national transposing laws by economic operators; the penalties must be effective, proportionate and dissuasive and may include criminal penalties for serious infringements. Market surveillance authorities evaluate products that present a risk to the health or safety of persons or to domestic animals or property, require corrective action, withdrawal or recall within a period commensurate with the risk, inform the notified body concerned, and if the operator fails to act prohibit or restrict the making available, withdraw or recall the product and notify the Commission and the other Member States; compliant products that still present a risk can be treated the same way. Formal non-compliance, such as a missing or wrongly affixed CE marking, a missing or wrongly affixed marking of explosion protection, group and category symbols or notified body number, a missing or incorrect EU declaration or attestation of conformity, incomplete technical documentation or missing identification and address information, must be ended and otherwise leads to restriction, prohibition, withdrawal or recall. In Denmark, the directive is implemented by executive order nr. 484 of 28 May 2026 on products for use in a potentially explosive atmosphere, in force since 30 May 2026, which repealed executive order nr. 811 of 3 June 2022 and also transposes the emergency procedures of Directive (EU) 2024/2749 (§§ 40 to 49). It is issued under the Danish product act (lov om produkter og markedsovervågning, consolidated as LBK nr. 22 of 8 January 2026), which lists the directive in § 2(1) no. 3 and names Erhvervsstyrelsen as control authority in § 9; Sikkerhedsstyrelsen, part of Erhvervsstyrelsen since January 2026, has controlled all products under the directive since 1 December 2018. Under § 38 of the order Erhvervsstyrelsen can order formal non-compliance corrected within a deadline, and under § 52 infringements are punished with a fine, rising to imprisonment of up to two years in aggravating circumstances such as danger to safety or health, an accident with serious injury or death, repeat or systematic infringement for financial gain or evasion of control, with a five-year limitation period and liability for companies. Notified bodies for the directive are designated by Erhvervsstyrelsen on the basis of DANAK accreditation (§ 39).", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02014L0034-20260530 · Art. 40, Art. 35, Art. 37 and Art. 38; https://www.retsinformation.dk/eli/lta/2026/484 · § 38, § 39, § 52 and § 53; https://www.retsinformation.dk/eli/lta/2026/22 · § 2, § 9 and § 37; https://www.sik.dk/erhverv/produkter/atex/kontrol-atex-produkter" }, "checklist": [ "Confirm the product is intended for use in a potentially explosive atmosphere, is a protective system, a safety, controlling or regulating device needed for the safe functioning of such a product, or a component for one, and that no Article 1(2) exclusion applies (Article 1).", "Decide your role for each product, remembering that selling under your own brand, modifying the product or using it for your own purposes makes you the manufacturer (Articles 2(12) and 10).", "Assign the equipment-group (I for mines, II for other places) and category (M1, M2, 1, 2 or 3) from the Annex I criteria and record the gas (G) and/or dust (D) atmosphere the product is designed for (Article 2(6) to (9) and Annex I).", "Identify the harmonised standards published in the Official Journal that cover the product and apply the Annex II essential health and safety requirements, including the supplementary requirements for its group and category (Article 12 and Annex II).", "Select the Article 13 conformity assessment route for the group and category and engage a notified body for EU-type examination, production surveillance or the deposit of the technical documentation where the route requires it (Article 13 and Annexes III to IX).", "Compile the technical documentation with the risk analysis and assessment, drawings, the standards applied, calculations, test reports and any notified body certificates, and keep it for 10 years (Article 6(2) and 6(3)).", "Draw up the Annex X EU declaration of conformity per product model, or the written attestation of conformity for a component, as a single declaration where other Union acts also apply, and put a copy with every product or batch (Articles 6(2), 13(3) and 14).", "Affix the CE marking, the notified body number where it is involved in production control, the specific marking of explosion protection, the group and category symbols, the G and/or D letter, the series or type designation, the serial number, the year of construction and the manufacturer's and importer's name and address (Articles 6(5) to 6(7), 8(3), 16 and Annex II, point 1.0.5).", "Supply instructions and safety information in the required language with the Annex II, point 1.0.6 content, and set up the corrective-action and notification procedure, 10-year supplier and customer traceability and, where the risks warrant it, sample testing and a complaints register (Articles 6(4), 6(8), 6(9), 8(4), 8(7), 9(4) and 11)." ], "faq": [ { "q": "When did the ATEX Directive 2014/34/EU start to apply?", "a": "The recast directive was adopted on 26 February 2014, published in the Official Journal on 29 March 2014 and entered into force on 18 April 2014. Member States had to transpose it by 19 April 2016 and apply their measures from 20 April 2016, when Directive 94/9/EC was repealed. Products conforming to the old directive and placed on the market before 20 April 2016 may still be made available or put into service, and certificates issued under Directive 94/9/EC remain valid under the new directive.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 41, Art. 42, Art. 43 and Art. 44" }, { "q": "What is the difference between ATEX 2014/34/EU and Directive 1999/92/EC?", "a": "Directive 2014/34/EU is the product law: it sets the requirements that equipment, protective systems, safety devices and components must meet before they are placed on the market and the duties of the economic operators. Directive 1999/92/EC is the workplace law: it complements the responsibilities of manufacturers under Directive 2014/34/EU by setting out the responsibilities of employers. The ATEX Directive itself leaves Member States free to lay down requirements for protecting workers who use the products, provided the products are not modified in a way not specified in the directive.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 3(2); https://single-market-economy.ec.europa.eu/sectors/mechanical-engineering/atex_en" }, { "q": "What are the ATEX equipment groups and categories?", "a": "Equipment-group I is equipment for underground parts of mines and those parts of surface installations of mines liable to be endangered by firedamp and/or combustible dust; it has categories M1 (very high level of protection, must remain functional with an explosive atmosphere present) and M2 (high level of protection, intended to be de-energised when an explosive atmosphere occurs). Equipment-group II is equipment for other places liable to be endangered by explosive atmospheres; category 1 is for areas where explosive atmospheres are present continuously, for long periods or frequently, category 2 for areas where they are likely to occur occasionally, and category 3 for areas where they are unlikely to occur or occur only infrequently and for a short period. The category determines the level of protection and the conformity assessment route.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 2, points (6) to (8), and Annex I" }, { "q": "Do I need a notified body for ATEX?", "a": "For most categories, yes. Categories M1 and 1 and protective systems require EU-type examination by a notified body (Annex III) combined with quality assurance of the production process (Annex IV) or product verification (Annex V). Categories M2 and 2 require EU-type examination combined with internal production control plus supervised product testing (Annex VI) or product quality assurance (Annex VII) for internal combustion engines and electrical equipment, while other M2 and 2 equipment follows internal production control (Annex VIII) with the technical documentation communicated to a notified body, which acknowledges receipt and retains it. Only Group II category 3 equipment follows internal production control alone. Unit verification by a notified body (Annex IX) may be used for any group. Components follow the same routes.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 13(1) to Art. 13(3)" }, { "q": "What must the ATEX marking contain?", "a": "All equipment and protective systems must be marked legibly and indelibly with the manufacturer's name, registered trade name or trade mark and address, the CE marking, the designation of series or type, the batch or serial number if any, the year of construction, the specific marking of explosion protection followed by the symbol of the equipment-group and category, and for Group II the letter G for explosive atmospheres caused by gases, vapours or mists and/or the letter D for atmospheres caused by dust, plus any information essential to safe use. The CE marking is followed by the identification number of the notified body where it is involved in the production control phase, and products designed for a particular explosive atmosphere are marked accordingly. Components carry no CE marking.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(6), Art. 13(3), Art. 16 and Annex II, point 1.0.5" }, { "q": "Which products are excluded from the ATEX Directive?", "a": "Article 1(2) excludes medical devices intended for use in a medical environment, equipment and protective systems where the explosion hazard results exclusively from explosive or unstable chemical substances, equipment for domestic and non-commercial environments where an explosive atmosphere may only rarely be created by accidental leakage of fuel gas, personal protective equipment (the text cites Directive 89/686/EEC, which Regulation (EU) 2016/425 replaced from 21 April 2018), seagoing vessels and mobile offshore units with their on-board equipment, means of transport for passengers or goods by air, road, rail or water, and equipment covered by Article 346(1)(b) TFEU. Vehicles intended for use in a potentially explosive atmosphere are expressly not excluded.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 1(2); https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0425 · Art. 46" }, { "q": "Do ATEX components need CE marking and an EU declaration of conformity?", "a": "No. Components intended to be incorporated into equipment or protective systems follow the same conformity assessment procedures as the equipment, but the CE marking is not affixed and no EU declaration of conformity is drawn up. Instead the manufacturer issues a written attestation of conformity declaring that the component conforms to the applicable provisions, stating its characteristics and how it must be incorporated so that the finished equipment or protective system meets the essential health and safety requirements. A copy of the attestation accompanies each component and is kept with the technical documentation for 10 years.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(2), Art. 13(3) and Annex VIII, point 4.3" }, { "q": "How long must I keep the ATEX technical documentation and traceability records?", "a": "Manufacturers keep the technical documentation and the EU declaration of conformity or attestation of conformity for 10 years after the product was placed on the market, authorised representatives keep both at the disposal of the authorities for the same period, and importers keep a copy of the declaration or attestation for 10 years and ensure the technical documentation can be produced. All economic operators must be able to identify who supplied them and whom they supplied for 10 years after the supply.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 6(3), Art. 7(2), Art. 8(8) and Art. 11" } ], "changelog": [ { "date": "2026-09-11", "kind": "guidance", "title": "Guide rewritten from the consolidated text of 30 May 2026", "summary": "The body now follows the consolidated text: the exact Article 13 conformity assessment routes per group and category, the Article 1(2) exclusions, the Annex II point 1.0.5 marking content, the 10-year retention periods, the Article 34 surveillance basis read as Regulation (EU) 2019/1020, the Danish executive order nr. 484 of 28 May 2026 and the move of Sikkerhedsstyrelsen into Erhvervsstyrelsen; the earlier unsourced references to Safety Gate and to specific standard families were removed.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02014L0034-20260530 · Art. 1, Art. 13, Art. 34 and Annex II, point 1.0.5; https://www.retsinformation.dk/eli/lta/2026/484" }, { "date": "2026-05-30", "kind": "applies", "title": "Denmark: executive order nr. 484 of 28 May 2026 in force", "summary": "Executive order nr. 484 of 28 May 2026 on products for use in a potentially explosive atmosphere enters into force, repealing executive order nr. 811 of 3 June 2022 and transposing the emergency procedures of Directive (EU) 2024/2749 in §§ 40 to 49; Erhvervsstyrelsen orders formal non-compliance corrected (§ 38), designates notified bodies on the basis of DANAK accreditation (§ 39), and infringements are punished under § 52.", "source": "https://www.retsinformation.dk/eli/lta/2026/484 · § 38, § 39, §§ 40-49, § 52 and § 53" }, { "date": "2026-05-30", "kind": "applies", "title": "Emergency procedures for crisis-relevant ATEX products apply", "summary": "The national measures transposing Directive (EU) 2024/2749 apply: Articles 38a to 38e let notified bodies prioritise conformity assessments, allow a Member State to authorise the placing on the market of a listed product without the notified-body procedures, let the Commission list standards or set common specifications giving a presumption of conformity, and require prioritised market surveillance and mutual assistance, for products designated as crisis-relevant goods while an internal market emergency mode under Regulation (EU) 2024/2747 is active.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024L2749 · Art. 7 and Art. 11; https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02014L0034-20260530 · Art. 38a to Art. 38e" }, { "date": "2024-11-28", "kind": "amendment", "title": "Directive (EU) 2024/2749 in force: internal market emergency procedures", "summary": "The amending directive of 9 October 2024, published on 8 November 2024, adds the definitions of crisis-relevant goods and internal market emergency mode and inserts Chapter 5a (Articles 38a to 38e); Member States had to transpose by 29 May 2026 and apply the measures from 30 May 2026.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024L2749 · Art. 7, Art. 11 and Art. 12" }, { "date": "2016-04-20", "kind": "applies", "title": "Directive 2014/34/EU applies; Directive 94/9/EC repealed", "summary": "Member States apply their transposing measures from 20 April 2016, the directly applicable definitions, Article 4 and Annexes I, II, XI and XII apply from the same date, and Directive 94/9/EC is repealed; products conforming to the old directive and placed on the market before 20 April 2016 may still be made available or put into service, and certificates issued under it remain valid.", "source": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034 · Art. 41, Art. 42, Art. 43 and Art. 44" }, { "date": "2014-04-18", "kind": "in-force", "title": "Directive 2014/34/EU enters into force", "summary": "Adopted on 26 February 2014 as a recast of Directive 94/9/EC aligned with the New Legislative Framework and published in OJ L 96 on 29 March 2014, the directive entered into force on the twentieth day after publication; Member States had until 19 April 2016 to transpose it.", "source": "https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32014L0034 · Art. 42(1) and Art. 44" } ], "sources": [ { "label": "Directive 2014/34/EU on equipment and protective systems intended for use in potentially explosive atmospheres, consolidated text of 30 May 2026 (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02014L0034-20260530" }, { "label": "Directive 2014/34/EU as published in OJ L 96, 29 March 2014 (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014L0034" }, { "label": "Document information, dates and relationships for CELEX 32014L0034 (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX:32014L0034" }, { "label": "Directive (EU) 2024/2749 on emergency procedures for the conformity assessment and market surveillance of products (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32024L2749" }, { "label": "Regulation (EU) 2019/1020 on market surveillance and compliance of products, Article 4 and Annex I (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32019R1020" }, { "label": "Regulation (EU) 2016/425 on personal protective equipment, Article 46 repealing Directive 89/686/EEC (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32016R0425" }, { "label": "Directive 1999/92/EC, the workplace directive on explosive atmospheres (EUR-Lex)", "url": "https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31999L0092" }, { "label": "Equipment for potentially explosive atmospheres (ATEX), including the ATEX Guidelines (European Commission, DG GROW)", "url": "https://single-market-economy.ec.europa.eu/sectors/mechanical-engineering/atex_en" }, { "label": "Bekendtgørelse nr. 484 af 28. maj 2026 om produkter til anvendelse i en potentielt eksplosiv atmosfære (Retsinformation)", "url": "https://www.retsinformation.dk/eli/lta/2026/484" }, { "label": "Bekendtgørelse af lov om produkter og markedsovervågning, LBK nr. 22 af 8. januar 2026 (Retsinformation)", "url": "https://www.retsinformation.dk/eli/lta/2026/22" }, { "label": "Kontrol med ATEX-produkter (Sikkerhedsstyrelsen, Erhvervsstyrelsen Markedsovervågning)", "url": "https://www.sik.dk/erhverv/produkter/atex/kontrol-atex-produkter" }, { "label": "Sikkerhedsstyrelsen, en del af Erhvervsstyrelsen from January 2026 (Sikkerhedsstyrelsen)", "url": "https://www.sik.dk/sikkerhedsstyrelsen-del-erhvervsstyrelsen" } ], "reviewer": { "name": "Conphora compliance team", "role": "Compliance editors, Conphora" }, "reviewedAt": "2026-09-24", "nextReview": "2027-03-14", "links": { "tools": [], "courses": [], "related": { "en": "/regulations/atex/", "dk": "/dk/eu-regulativer/atex/" } } }